PVC Floor Transition Strip(2mm Thick × 5cm Wide) Laminate Floor Cover Strips Self Adhesive Door Bar Divider Strip Flat Flooring Edge Joining Trim(9M,White)

• 【Proper Height】The thickness is only 2mm.the width is 5cm, suitable as a door threshold strip.
• 【Wide Application】The rubber transition strip is quite suitable for covering the floor tile gap, also widely used as divider strip of transition area between living room and kitchen.
• 【Material】The floor transition strip is made of PVC material, durable and flexible, is easy to cover gaps, cracks and damaged corners.The gap-floor can be repaired quickly with this practical flooring transition strip in fast and easy way.
• 【Easy to Install】The vinyl transition floor edge trim with self-adhesive design, is easy to be installed by peeling off the red backing, placing in position and sticking firmly on the floor.
• Kindly Reminder:1.When installing, please make sure the floor is clean and smooth, don't installed on the uneven surface.2.The product may be squeezed and deformed during transportation ,you can reverse the bending and press the transition strips with a heavy object for 1-2 hours to make it flat again. 3.when the temperature is below 20℃，please use a hairdryer to reheat the backing adhesive.

Installation : 1.1. Please wipe the surface, make sure the surface is clean and dry. 2.Cut both ends of the molding trim into 45° according to the measured size; 3.Peel off the adhesive backing and stick it onto the smooth corner you need. 4.Please wait patiently for 24 hours to complete the final decoration work. TIPS: 1.In the cold season,it is suggested to use a hairdryer to heat the adhesive strips for better sticking effect during installation; 2.Clean the surface and dry it before installation! 3.The moulding trim suit for all kinds of Smooth Flat floor,such as smooth marble floor,coating floor and other smooth surface.Not suit for severe sags and crests floor, big gap floor and mosaic glass floor; 4.Please make a mark in advance to avoid repeated sticking, which will affect the stickiness; 5.After the installation is completed, it needs to be kept dry for 24 hours.