Prince August Hobby Casting mould - 3x Fantasy 25mm Skeleton Knights PA689

• Rubber moulds can be reused hundreds of times.
• Casts Skeleton Knight figures.
• This mould casts 25mm scale metal miniatures.
• Suitable for low temperature metals only. Temperature cannot go above 450 celsius.

Description Ideal for fastasy games or roleplaying. Armoured skeletons are far more challenging than regular skeletons, as the armour protects against blunt weapons, normally useful for dealing with such creatures. They are also stronger and larger skeletons as they were originally knights, which would be large men anyway. They still need a necromancer or mage to raise and maintain them. There is one mould in this blister pack. It casts 25mm scale figures. Scale refers to an average sized human standing up straight measures from top of head to toe as a baseline. Actual height of castings will vary depending on pose, armour and accessories. You should be able to cast approximately nine figures from a single bar of 125 gram metal, provided you remelt the ingates. Hobby Casting is easy to learn and requires only a small amount of equipment, to melt suitable metal, usually an alloy with large quantities of TIN in it. We recommend our Model Metal PA2048 or 5 Star pewter PA2059. The process for casting is simple: Melt metal into a ladle, Assemble this mould as instructed. Pour the liquid metal into this assembled mould via the assigned holes in the side. Wait for about 5 minutes for the metal to cool. Unassemble the mould and carefully remove the figures. Trim off the excess ingates (metal plug that let the metal enter the mould) and these can be remelted for the next casting. Polish, prime and paint the figure as you would any metal figure. Never cool metal with water. Always warm the mould gently to make sure its dry by placing it near a heat source for a short time. Store moulds in a dry dark place.