Premium Stainless Steel 3 Roller Geared |Grain Mill | Barley Crusher | Malt Muncher kit

• This premium grain mill is featured with three superior grade of steel (SS304) rollers. One of top two rollers is spun by the drive shaft, and it drives the other top roller through a set of two alloy steel gears.
• Grains from the top fixed gap are fed to the adjustable gap between the main driving roller and the bottom third roller. The gears are covered to keep them clean. The grain mill comes with one large hopper of 6kg capacity, one silicon rim for hopper, one crank handle, and one finger guard.
• The three rollers are made of premium stainless steel 304, of 1.5" (37.8mm) diameter. Grains are crushed twice, i.e. start with a preliminary crush through the fixed gap (0.068", 1.71mm) between the top two rollers, and end with a pass through the adjustable gap (0.025"-0.1", 0.64-2.54mm) between the driving roller and the bottom idler roller.
• The first crush slightly flattens the grain, and gets it ready for the next crush, which breaks apart the grains and loosens the starch with minimal husk damage. This mill is designed for barley, wheat malt and un-malted wheat, but NOT suitable to mill corn and rye.
• large hopper Capacity: 13lb(6kg)

This premium grain mill is featured with three superior grade of steel (SS304) rollers. One of top two rollers is spun by the drive shaft, and it drives the other top roller through a set of two alloy steel gears. Grains from the top fixed gap are fed to the adjustable gap between the main driving roller and the bottom third roller. The gears are covered to keep them clean. The grain mill comes with one large hopper of 6kg capacity, one silicon rim for hopper, one crank handle, and one finger guard. The three rollers are made of premium stainless steel 304, of 1.5" (37.8mm) diameter. Grains are crushed twice, i.e. start with a preliminary crush through the fixed gap (0.068", 1.71mm) between the top two rollers, and end with a pass through the adjustable gap (0.025"-0.1", 0.64-2.54mm) between the driving roller and the bottom idler roller. The first crush slightly flattens the grain, and gets it ready for the next crush, which breaks apart the grains and loosens the starch with minimal husk damage. This mill is designed for barley, wheat malt and un-malted wheat, but NOT suitable to mill corn and rye. Package Include： 1 * 3-Roller Mill Body 4 * Grain Hopper (4 Pieces) 1 * Crank Handle(12mm) 1 * Silicone Rim 1 * Set of Screws(12 bolts and 12 nuts & 2x Locknut) 1 * Finger guard(150*86*40mm) 2 * Closed gear(￠39*t5)