ElekTek UK E27 Lamp Refurbishment Fixing Kit, Solid Brass Plain Edison Lamp Holder, Inline Rocker Switch, Extensive Fittings Pack, 13A Plug (3A Fuse) Gold Twisted Braided Fabric 3-Core Lighting Flex

• UK Manufactured Solid Brass E27/Edison Screw (ES) lamp holder complies with BS EN 60238 Safety Requirements which all E27 Lamp Holders are required to comply with for use in the UK/EU, 1/2" threaded bottom inlet (26TPI)
• PLEASE NOTE: this E27 Lamp Holder does NOT have shade rings and is NOT suitable for use with lampshades - Please see version with lampshade rings at: https://www.amazon.co.uk/dp/B07X6GW8MF
• Perfect for refurbishing an old table lamp or making/creating your own new lighting project - the included extensive Lamp Kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base
• 2.5m 3-Core (Earthed), 6A (0.75mm conductor) Textile Fabric Braided Lighting Flex/Cable
• Extra components are provided to ensure maximum compatibility with existing parts - to ensure electrical regulations are met two types of strain relief are provided

Product description Perfect for creating a new lighting project or refurbishing an old table lamp. EACH LAMP KIT COMPRISES: E27 Plain Skirt Lamp Kit - Twisted Flex Half inch entry, brass E27 lamp holder plain skirt 2.5m gold coloured, 3 core, twisted braided lighting flex 0.75mm Clear, low profile torpedo switch 2 Amp switch, single pole Transparent 13A plug with 3A fuse LAMP KIT ACCESSORY SELECTION The included, comprehensive Lamp Kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base. Half inch threaded tube, 38mm length Half inch grip washer Half inch back nut Half Inch brass wood nipple To ensure maximum compatibility with items requiring a smaller entry: Half inch to 10mm brass reducer 10mm threaded tube, 20mm length 10mm grip washer 10mm back nut PROTECTIVE COMPONENTS Nylon washer (fits underneath product) Fibre washer for ceramics and pottery (fit between lamp holder and thread) Flex/cable strain relief components (required for all flex installations to lamp holders) Black screw down flex clamp/collar with two screws for wood bases Black through-cable clamp for flex All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician. All metal electrical fittings must be earthed; all metal ElekTek products have earth terminals where required. Legal Disclaimer All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician. All metal electrical fittings must be earthed; all metal ElekTek products have earth terminals where required.