Premier Equine Set of 4 horse studs for soft ground

The pins simply screw into a pre-formed hole inside the horse's shoe, made by the dairy. All our studs require a standard 3/8' Whitworth pre-formed hole. We recommend choosing the best nail for your horse based on the nature of the terrain - soft or hard - and your performance needs. It is recommended to use a rounded head on the inner edge of the underwire to avoid injuries caused by blows from the opposite leg. The nail kit should contain a set of nails of different shape to meet the needs of the horse, a tap to clean the thread of the nail hole before use, a wrench and caps for nails. Stallion holes should always be plugged when not used to prevent stones and debris from entering or damaging the hole. In addition, it may be worth investing in a magnetic metal bowl to prevent the studs from being lost and to help you find them when they fall into the grass. It is recommended to check the studs holes the day before a race to make sure the shoe thread is intact and the studs apply properly. After use, be sure to clean and store the studs in a dry place. We recommend using caps to ensure that the pre-formed hole remains free of debris. How to apply the cleat Before applying the cleat, it is important to ensure that the pre-formed hole is free of debris. It may be useful to use a tap to remove excess dirt. Start screwing the inner pin, turning it clockwise with your fingers, making sure that the thread of the pin neck evenly penetrates the hole.