Polycraft FC100 (White) Fast Cast Paintable Polyurethane Liquid Plastic Casting Resin System - 2kg Kit

• Polycraft FC100 Fast Cast Resin
• Liquid Plastic Prototypes
• Paintable After Cured
• Polyurethane Resin
• Fast Working & Demould Times

Product description Polycraft FastCast 100 is an unfilled fast setting polyurethane resin system. Exhibiting excellent flow-ability, short demould times, low shrinkage, good dimensional stability, detail reproduction and good machining qualities. Used for casting master and core models, negatives and general small mouldings. Used in a wide variety of industries from Art, Craft, Engineering, Film & TV, Pattern Making and more. Applications include : Patterns, Negatives, Castings, Models, Vacuum forming tools, prototypes etc. Mix Ratio - 1A : 1B Pot Life 200g @ 20°c - 2 - 2.5 mins Demould Time - 20 mins Shore - D70 Heat Distortion Temp - 75 ± 3 °C Viscosity at 25°c Mixed - 30 ± 5 Cured Colour - White Each kit will come with the same weight in each container, both part A and B are different volumes, therefore the resin must be measured by equal weights, shake well before use. Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use metal or plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools). Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Pour mix into mould cavity. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination may cause foaming of the plastic. Legal Disclaimer Unfortunately we are unable to ship this item to, Isle of Man, Channel Islands or any Scottish Islands. Orders placed for these addresses will be cancelled and refunded due to carrier restrictions.