Pixel Wireless Remote RW221-L1 Shutter Release Remote Control Compatible with Panasonic S5, S1, G95, G91, G90, FZ10002, G9, GH5, GH6, G85, G81, G70, GH4, GH3, FZ2500, FZ2000, FZ330, FZ200, FZ100, FZ30

• 🍀Compatible with Panasonic S5, S5C, S5K, S5M2N, S5M2XN, S5DN, S5DH, S1H, S1RM, S1R, S1M, S1K, S1, G97, G95, G91, G91H, G91M, G90M, G90H, G90, G9M2M, G9M2L, G9M2, FZ10002, G9, G9L, G9M, GH5, GH5L, GH5S, GH5M, GH5M2, GH5M2L, GH5M2M, GH6, GH6L, GH6M, GH7, GH7L, GH7M, G85, G81M, G81H, G81, G80M, G80, G70H, G70M, G70KA, G70K, G70W, GX8K, GX8M, GX8A, GX8H, GX8, GX7, GX1, GH4RH, GH4R, GH4, GH3,GH2, GH1, GF1, G10, G7H, G7K, G7M, G7, G6H, G6K, G6M, G6, G5, G3, G2, G1
• 🍀Compatible with Panasonic FZ2500, FZ2000, FZ1000, FZ1000 II, FZ330, FZ300, FZ200, FZ150, FZ100, FZ50S, FZ50K, FZ50, FZ30K, FZ30, FZ20S, FZ20K, FZ20, LC-1, L10, L1, Leica DigiLux 2, DigiLux 3, V-Lux 4. Replaces Panonsonic DMW-RSL1 and DMW-RS2
• 🍀Shooting modes: Supports autofocus, Single shooting, Continuous shooting, High speed continuous shooting, BULB and 4s delay shooting, also control multiple receives and cameras to sync shooting as well
• 🍀Prevent shaking caused by holding camera and allows you to trigger your camera wirelessly up to 100 meters (FSK 2.4 GHz stable and anti-interference)
• 🍀Shutter connecting cable is interchangeable. This design to allow you to use this item on different brand cameras and only need to purchase a connecting cable
• 🍀Supports replacing connecting cables to fit different brands and models of cameras. (Important information: If the device doesn’t flash signal lights when you receive it, please Replace 4pcs new batteries and make sure install batteries correctly according to the "+""-" symbol)
• 🍀Has good craft design and ergonomics, comfortable feel and good looks

Specification Model: FSK 2.4GHz wireless remote control system Rmote control range: 80m Conmmunication channel: 16 Transmitter launch power: 0dB Receiver sensitivity: -99dB Connecting cable: 30cm straight cable Transmitter stand-by time: over 1000hur (with 2pcs AAA alkaline battery) Receiver stand-by time: Over 400hur (with 2pcs AAA alkaline battery) Transmitter dimension (L*W*H): 97mm*33mm*15mm Receiver dimension (L*W*H): 66mm*37.5mm*28.5mm Transmitter Weight: 21.8g Receiver Weight: 32.2g Included items: 1 x Oppilas transmitter 1 x Oppilas receiver 1 x Shutter release cable 1 x Instruction manual Please note: No batteries are included in the packing. 1. Single shooting: put camera in Single shot mode, put Transmitter in Single shot mode. 2. Continuous shooting: put camera in Single shot mode, put Transmitter in Continuous shot mode. ( number of frames depends on the camera) 3. High-speed shooting (CH): put camera in Continuous shot mode, put Transmitter in Bulb mode. A half-press of the Shutter Button will focus, a full press will start and a full press again will stop. ( number of frames depends on the camera) 4. Bulb: put camera in Bulb mode, put Transmitter in Bulb mode. A half-press of the Shutter Button will focus, a full press will start and a full press again will stop. 5.Four seconds delay shooting: put camera in Single shooting mode, put Transmitter in 4 seconds delay shooting mode.