Barrettine Peelaway Marine Test Kit (150g) - Sample Pots for Trial Test Patch, Antifouling Stripper for Wood, Metal, Concrete & GRP to Remove Multiple Layers of Anti-Foul Coatings

• ANTIFOULING REMOVER - Peelaway Marine is specially formulated to effectively remove multiple layers of anti-foul coatings with one application, saving time by reducing the need for repeated scraping.
• TESTING KIT - This 150g testing kit is perfect for those who are new to Peelaway Marine. These sample pots allow you to carry out a test patch in an effective & affordable way before committing to a larger pot of our antifoul coating remover.
• PATENTED POULTICE SYSTEM - The paint stripper boasts a patented water based poultice system means the product remains active and works without rapidly drying out.
• SIMPLE APPLICATION - Thanks to its light paste consistency, the boat antifouling remover is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel, and for larger areas, an airless sprayer can be used for a more efficient coverage.
• VERSATILE ANTIFOUL STRIPPER - Suitable for most hull types including GRP, wood, metal & concrete. Always test a small inconspicuous area before applying the industrial strength hull stripper generally. Perfect for those wanting to keep their boats in pristine condition.

SAFETY: Wear coveralls, chemical resistant gloves, face mask and eye protection. If in doubt, show this label/product to your PPE supplier or call us for further advice. Ensure adequate cross ventilation if indoors. Keep anti foul coating strippers away from children and animals. Store product in a cool dry area and always replace the lid after use. In case of spillage, wash the affected area with plenty of water. See Health safety and Environmental information box below for full regulatory warnings. COVERAGE: Coverage will vary from project to project. Determining factors will include; the number of anti fouling boat paint layers to be stripped and the type and age of anti-foul to be stripped. The test patch referred to above is vital to determine coverage for each particular application but as a rough guide 1kg of the boat cleaner will cover 2-4m2. REMOVAL: Slide scraper into paste and paint, keeping the paint, paste and cover together as much as possible. Take care not to gouge/scratch the gel coat. Certain paints can be softened but not easily removed with the scraper, in which case try rubbing with a scouring pad with water or mineral spirits until the original surface is revealed and wash down with water. Steam cleaning or pressure washing may also aid removal of residues. Alternatively any remaining residue pre-softened can be removed in a few hours with a further application of Peelaway Marine. Once all the old antifoul paint has been removed, any remaining residues of Peelaway Marine must be cleaned/washed away. Allow the cleaned surface to dry thoroughly before re-coating DISPOSAL: Collect all residues and dispose according to local regulations for this type of waste.