PeakTech P TK-100 – Oscilloscope probe, 100 MHz, 10:1/1:1, High quality probe with BNC connector, Universally applicable for all oscilloscopes

• INTRO: The TK-60, TK-100, TK-250 and TK-250/100 are passive high impedance oscilloscope probes designed and calibrated for use on instruments having an in-put impedance of 1 M shunted by 20 pF
• SAFETY: This probe has been designed for use on low energy systems only as defined in category II of EN 61010-031. The probe should only be used with oscilloscopes, which have a grounded BNC connector
• SPECIFICATIONS: Attenuation ratio 1:1, Bandwidth DC up to 6 MHz, Rise time 58 ns, Input Resistance 1 M (Oscilloscope Input), max. Working voltage 150 Vrms CAT II (1:1)
• ACCESSORIES: Channel Identifier Clip PA-105; Sprung Hook PA-106; Ground lead PA-107; Insulating Tip PA-108; Measuring Tip PA-102 (excl. TK-60); IC Tip PF-902; Adjusting Tool PF-903; BNC Adaptor PF-901 (only P TK-250 and TK-250/100)
• INFO: Input Resistance 100 M by using an oscilloscope, Input Capacitance 5,5 pF, ompensation range 10 ... 30 pF, max. working value 1500 Vrms CAT II (2000 V DC or ACpp) (decreasing with increasing frequency)

Universally applicable oscilloscope probe for every commercially available oscilloscope. There is a crocodile clip on the side of the probe as a ground connection. The outer BNC connector is made of metal and therefore has ground contact. The tip of this probe has a metal contact for connection to the test voltage, the probe is also supplied with a cable clamp to create a permanent connection with the pin or cable to be measured. This probe convinces with good workmanship, extensive accessories and a good price / performance ratio.