Pack of 10 Grain Of Wheat Miniature White Light Bulb Lamps With Wires, 3V Or 6V, 0.2W Or 0.4 W (3 Volt)

• Available in 3 Volt and 6 Volt versions
• Polarity independent
• Low voltage A.C. and D.C. compatible
• Wire leads attached
• Traditional white filament bulb colour appearance

Pack of 10 Grain Of Wheat Miniature White Light Bulb Lamps With Wires, 3V Or 6V, 0.2W Or 0.4 W This is a pack of ten wire-ended bulbs available in 3V and 6V versions. The operational current is 65mA in both cases. The 3V types are 0.2 Watts. The 6V types are 0.4 Watts. The glass envelope diameter is approximately 3 x 7mm and the wire leads are 110mm. There are applications where these are more suitable than LEDs such as: * In modelmaking where the traditional colour of a tungsten filament lamp is desired, rather than the bluish light obtained from white LEDs. This is especially pronounced when running at less than full power. These bulbs also provide illumination all round which is difficult to obtain with a single LED, due their natural one-sided nature and lens focussed packaging. * In low voltage A.C. applications where LEDs would flicker and suffer excess reverse voltage. * Replacement bulb for scale illumination in old tuners, oscilloscopes, and radios etc. * Replacement bulb for indicators in vintage equipment e.g. the stereo pilot indicator in old tuners where the slower turn-on and turn-off of a filament bulb rather than the instantaneous behaviour of an LED is desired. You can connect these directly to a battery supply of the appropriate voltage. The 6V types will work well on a 5V USB power supply at slightly less than maximum brightness, giving a warmer looking glow.