Owatrol 2.5 litres Seasonite Protection Soft and Wet Wood Maintenance

• Wet and new soft wood waiting protection
• Stabilises and protects new wood

Product description Stabilizes and protects the wood during its first months of exposure to the elements. Seasonite - Protection for all new exterior softwoods - Owatrol Seasonite protects the wood of the damaging effects of the Sun and moisture during the first year where it is exposed to atmospheric agents. An immediate application of Seasonite protects wood against the sun damage, him keeping his new appearance longer. Breathable, it allows excess water to regulate everything in avoiding that moisture penetrates into the wood. With Seasonite, the new wood is naturally exposed without the constraints of weather in the first year. Properties: Retains the natural look and stabilizes the new wood. Minimizes the outbreak, swelling, deformation and cracking due to exposure permanently to the Sun and the rain. Easy to apply - in a single layer. Colorless. Ready to use. Destinations: Only for new external soft Woods (within six months of exposure) during the first months of exposure. Ideal for wood treated by autoclave. Horizontal and vertical surfaces: grating, siding, shingles, fences and other outdoor media wooden. NB : For a wood that has been already exposed to the weather for several months, use Net-Trol. Surface preparation: Surfaces must be clean, dry to the touch, free of dust, grease, mold and all other surface dirt. Application equipment: Brush. Roll: medium pile Good application tips: Cover everything that should not be treated, including plants and shrubs. Apply between + 10 ° C and + 30 ° C. Do not apply in direct sunlight or on hot surfaces. Do not apply if the cold and/or wet weather is expected within 24 hours. Carefully mix the product before application. Do not dilute. Vertical cladding will be processed from the top down. After spray application, always spread the product with a brush or roller to improve penetration and uniformity. Applicatio Directions Surfaces must be clean, dry to the touch, free of dust, grease, mold and all other surface dirt. Apply between + 10 ° C and + 30 ° C. Do not apply in direct sunlight or on hot surfaces. Do not apply if the cold and/or wet weather is expected within 24 hours. Carefully mix the product before application. Do not dilute. Vertical cladding will be processed from the top down. After spray application, always spread the product with a brush or roller to improve penetration and uniformity.