Othmro PE Heat Shrink Tube 2:1 Electrical Insulation Tube Wire Cable Tubing Sleeving Wrap 12mm Diameter 12M Length Black 1PCS

• Diameter(Before Shrinking): 12mm / 0.47" ; Length ( approx.): 12m / 39.4ft; Shrink Ratio: 2:1.
• Operating Temperature: -55 to 125 Degree Celsius; Flammability: VW-1, Flame Retardant.
• Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
• Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
• Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.

Description: Product Name：Heat Shrinkable Tube Material :Polyethylene Shrinkage Ratio: 2:1 ( will maximum shrink to 1/2 of its supplied diameter ) Rated voltage: ≥ 600V Complete shrinkage temperature: 120 ℃, temperature resistance grade: 125 ℃ Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance. Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more. This heat shrink tube is best for wire connection, solder joint protection, connectors sealing, group lines marking, resistance electric capacity insulation protection etc. 1.Measure the diameter of wire/cable you want to wrap, make sure the diameter is equal to the size of heat shrink tube after shrinked, because the tube will shrink up to 1/2 of original diameter after heating. 2.Cut the heat shrink tubing to a usable length, and be sure to allow for a minimum 1/4" overlap over any existing insulation or connectors. Keep in mind that tubing also shrinks lengthwise. Most heat shrink can be cut easily with standard scissors, or you can use a small knife. 3.If you'll be splicing two cables together, slide the tubing over the center of the splice, and allow for equal overlap on both sides, so that the entire splice itself is fully covered. 4.Any commercial heat gun or heat shrink oven can be used to shrink the tubing. Evenly apply heat over the length and around the diameter of the tubing, until it is uniformly shrunken and conforms to the shape of the cable, hose, splice or action figure that it's covering.