Osmo Stone & Terracotta Exterior Oil Clear Satin 620-0.75 Litre

FOR EXTERIOR STONE AND TERRACOTTA SURFACES Clear, satin natural oil impregnation penetrates in the microporous surface and will not form a film on the surface. Through the impregnation with Osmo Stone and Terracotta Oil, the microporous surface becomes water and dirt repellent as well as stain-resistant. Dust resulting from screed and concrete surfaces is greatly reduced. Especially suited for exterior paving and window sills made of granite as well as limestone and slate. INFORMATION Product code: 620 Approx. coverage: 32m²/L with one coat No. of coats: 2 Drying time: 8-10 hrs. Sizes: 0.75L, 2.5L ADVANTAGES Unique oil combination Protection against dirt and abrasion Highly water repellent Microporous, breathable finish which does not crack, peel, flake or blister TIPS Oils enhance the natural colour of the substrate (permanent wet effect). Trial application is absolutely essential! Impregnation may influence the slip resistance of the original surfaces. White or very light-coloured stone/surface may yellow slightly as result of the oil treatment! For acid sensitive stones like marble and limestone, avoid prolonged contact with acidic liquids such as fruit juice, wine, cola, and vinegar. Prolonged contact with acidic substances can cause etching to acid sensitive surfaces Non-absorbent surfaces, such as glass, glazed tiles or ceramic, cannot be treated (impregnated). Substrates sensitive to solvents (e.g. plastics such as Plexiglas) must be protected. A lack of ventilation leads delays in drying. Pre-sealing of absorbent tiles prior to grouting might be possible. We highly recommend a trial is carried out first to ensure coloured grouts do not stain the tile. Please ensure that the tiles are completely dry before using Osmo Stone and Terracotta Oil. We highly recommend allowing at least 7 days for newly laid tiles to release moisture from adhesives before sealing. Substrates without a damp proof membrane may take longer to dry. Very porous surfaces my require t