ORX VIFLY StoreSafe Smart Lipo Battery Discharger XT30 with Heatsink for 2-6S Lipo

Product description This version of the VIFLY StoreSafe comes with a XT30 plug and it is a smart lipo battery discharger that can intelligently discharge your battery to storage voltage. With it's built-in advanced algorithm and the temperature sensor, it can keep the highest discharge rate in an appropriate temperature range and the built-in heatsink effectively dissipates the heat to prevent the discharger from overheating. The VIFLY StoreSafe lipo discharger automatically identifies 2S to 6S lipos making it simple and convenient for the user. And one of the simplest ways to store your lipos. The StoreSafe will stop discharging when your battery reaches storage voltage and then goes into an ultra-low leakage current so the unit can be left for long time without over-discharging the battery. Operation: Before using StoreSafe, please make sure that the voltage of each battery cell is higher than 3.95V. After plugging in the battery, the LED that indicates the status will flash for about 5 seconds and then enter the discharging state. If the LED status not indicates correctly, please disconnect the battery immediately. The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low leakage current (<10uA) Specs Working Voltage: 7.9 - 26V(2S-6S) Discharging Power: 1W Turn-off Current: <10uA Storage Voltage: 3.85V±0.08V / cell Connector: XT30 Weight: 8g Size: 37 x 16 x 10 mm Important: Use responsibly. Never leave lipos that are charging or discharging alone. We advise lipos be discharged outside and preferable in a metal container to minimise risk. Legal Disclaimer Use responsibly. Never leave lipos that are charging or discharging alone. We advise lipos be discharged outside and preferable in a metal container to minimise risk.