Orno CR- 233 Twilight Switch Outdoor with External Probe in Housing || Light Intensity LUX Adjustment || Protection class: IP65

• Energy saving: thanks to the automation of switching on and off the devices connected to the sensor, you optimise energy consumption and reduce bills in your home or business.
• Lighting automation: the sensor automatically turns on the connected device when the light intensity near the sensor falls below the set value.
• Adjustable: The sensor has a simple setting, thanks to which you can adjust the lighting intensity at which the sensor should turn on the device connected to it.
• Outdoor probe: the sensor probe is sealed and can be safely installed outdoors
• Multiple devices at the same time: The sensor can handle loads of up to 2300 W, so you can connect multiple devices to a single sensor.

// Twilight switch outside 230 V \\ The device is used for automatic control of lighting or other electrical consumers and Saves electricity at the same time. Its task is to turn the circuit on and off when the light intensity falls below the set value. Potentiometer for adjusting the light intensity. An external probe with A cable length of approx. 1 m (2 x 0.5 mm²). Timer with twilight sensor. Technical data: Sensor type: dusk. Viewing angle: not applicable. Detection range: not applicable. Supply voltage: 230 V, 50 Hz. Max. Load capacity: 2300 W. Protection class: IP20 / IP65. Colour: white. Light intensity lux adjustment: yes. Light intensity (LUX): <2 - 100 lux. Time setting: no. Adjustment range time: not applicable. Range adjustment detection: no. Installation: surface-mounted. ☑️ Sensor Dimensions (W/H/D) [mm]):48 / 63.4 / 29.3 Mounting hole (diameter [mm]): diameter 9.6