Orno OR-CR-206 Flush-Mounted Indoor Motion Sensor with Light Switch and Clapping Switch Does Not Work with LED, Minimum Load 40 W 160 Degree IP20 White

• ✔️【Intelligent solutions】With the device, you can reduce energy consumption by automatic light control - either via motion detector or sound detector. In addition, you have a normal on/off switch.
• ✔️ 【Upgraded Light Switch】Can be used as a normal light switch and an automatic detector that works with a motion sensor.
• ✔️ 【Twilight Sensor】Built-in adjustable twilight sensor allows you to adjust how dark it needs to get so that the device automatically turns on the light (after detecting motion or sound).
• ✔️ 【Compatible with many light sources】The device is compatible with halogen, energy saving devices and incandescent lamps. It does not work with LED lighting.
• ✔️ 【Swatter Switch】 The device has a sound sensor that acts as a non-contact switch. The function can be used optionally.

// Motion sensor inside \\ The sensor is used to automatically control the lighting or other electrical devices. It works in a 3-wire system. The device can be installed in an O60 mm wall box. Potentiometer for adjusting the lighting time and light intensity. The sensor works together with LED lighting. // Motion detector inside flush-mounted technical data \\ Sensor type: infrared. Viewing angle: 160 degrees. Detection range: 9 m. Supply voltage: 230 V, 50 Hz. Max. Load capacity: 1200 W. Protection class: IP20. Colour: white. Light intensity Lux adjustment: yes. Light intensity (LUX): <3-2000lux. Time setting: yes. Setting range time: min: 10 seconds. ± 3 seconds. Max: 7 min.±2 min. Range adjustment detection: no. Installation: flush-mounted. Sensor dimensions (w/h/d. [mm]):75/75/50 Mounting hole (O [mm]): O60.