Offgridtec 7 m/4 mm electronics, 7 m

• Solar module connection cable with 4mm² wire cross-section and 7m total length
• Made of SOLAR XLS-R T twin cables from Lapp, as well as original MC4 connectors from Stäubli in our cable factory in Lower Bavaria
• Suitable for all solar modules which are equipped with MC4 connectors
• On the charge controller side, the cable ends are cut for easy removal of the sheath and exposure of the bare core - The cable can be connected to any charge controller with the appropriate receptacle (min. 4mm²)
• Properties of the connection cable: Ozone-resistant, weather- and UV-resistant, flame-retardant, halogen-free, acid-alkaline-resistant, radiation-cross-linked outer sheath and core insulation

This 2-core solar cable professionally connects the solar charge controller with the solar modules in a solar system. On the module side, the cable has original Multi-Contact MC4 connectors and on the charge controller side, the cable ends are cut for easy stripping of the sheath and exposure of the bare core. The cable can be connected to any charge controller with the appropriate receptacle (min. 4mm²). Most 12V modules have MC-4 connectors. If your module has other plugs, you will find the appropriate adapters in our shop. All components have been crimped with specialist tools and have an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product. Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24V systems and upwards. For 12V you should use at least 6mm². Properties Solar cable suitable from 24V system Length: 7m MC-4 plug 4mm cable cross-section double insulated resistant to: UV, ozone, weather, water very flexible Properties MC-4 plug & socket - Contact protection, unplugged IP2X - Protection class, plugged IP67 - Temperature application range -40° ...90° C - Insulation material PA - Locking system snap-in - Cable strain relief according to IEC 61984 - Contact system MC contact lamellae - Contact material copper, tin-plated - Flame class UL94-V0 - Protection class II - System voltage up to 1000V - Material: Copper / Tin