NVR Switch with Emergency Stop Button, 13A UK Plug, 100 cm and 50 cm Cables

• HANDS-FREE STOPPING: The large red paddle gives you a clear, easy-to-reach control point when both hands are guiding a workpiece. Mount the emergency stop switch at knee or thigh height, then press the paddle with your leg or hip to cut power without reaching across a running router, saw or lathe. The green and red controls stay beneath the paddle for simple start and stop use.
• NO-VOLTAGE RELEASE: Press the green button to energise the NVR switch; its solenoid holds the circuit active until the red paddle is pressed. If the mains supply is interrupted, the solenoid releases instead of remaining latched, so power restoration does not restart the connected tool until the green button is pressed again. This electromagnetic switch function supports safer workshop control.
• PRE-WIRED CONNECTION: Connect the 13A UK plug to a suitable mains socket and insert one compatible tool plug into the female socket; no internal wiring is required for setup. The 100 cm male cable and 50 cm female cable provide 150 cm combined reach, while the clearly marked green and red buttons make the on off switch easy to operate. Check cable routing before fixing the housing in place.
• BUILT FOR FIXED TOOLS: Screw-mount the housing where the red paddle can be reached quickly without leaving your normal working position. Use it as a table saw paddle switch or with a compatible router table, wood saw, drill, lathe or milling machine fitted with a UK 3-pin plug. Confirm the connected tool remains within the switch and plug ratings, and connect only one tool at a time.
• WATER-RESISTANT HOUSING: The IP55-rated enclosure helps resist workshop dust and water ingress in normal use. Its plastic body supports mounting on a bench, machine stand or cabinet. The red cover shields the controls and provides a broad contact area that is easy to locate. Before each use, inspect the single phase switch, cables, plug, socket and fixings for damage or looseness.

Product Specification Product Name: Pre-Wired NVR Safety On Off Switch Switch Type: Single-phase electromagnetic NVR switch with emergency stop paddle Operating Method: Green start button and large red OFF paddle Plug Type: UK 3-pin fused plug and UK female socket Plug Marking: BS1363/A, 13A Switch Housing Size: Approx. 11 × 6.3 × 6 cm Male Cable Length: Approx. 100 cm Female Cable Length: Approx. 50 cm Combined Cable Length: Approx. 150 cm Protection Rating: IP55 Housing Material: Plastic Colour: Black housing with yellow control panel and red safety paddle Suitable Equipment: Compatible routers, router tables, table saws, wood saws, drills, lathes, milling machines and other suitable fixed power tools with a UK 3-pin plug Important: The 13A marking shown in the product information relates to the fused UK plug. Confirm the switch rating and the connected tool requirements before use. Package List 1 × Pre-wired NVR safety switch 1 × Integrated 100 cm male cable with UK 3-pin plug 1 × Integrated 50 cm female cable with UK socket How to Use Select a stable mounting position where the red paddle can be reached easily by hand, knee, thigh or hip. Secure the switch housing to the workbench, machine stand or cabinet using suitable fixings. Insert the compatible power tool plug into the female socket, then connect the fused UK plug to a suitable mains outlet. Press the green button to energise the connected tool. Press the large red OFF paddle to cut power. If the mains supply is interrupted, the electromagnetic mechanism releases. After power is restored, press the green button again to restart the connected tool. Safety and Use Notes Connect only 1 compatible tool at a time. Confirm that the voltage, current and power requirements of the connected tool remain within the ratings of both the switch and plug. Switch off the mains supply and unplug the unit before changing accessories, adjusting tooling, cleaning or carrying out maintenance. Do not rely on the red paddle as the only means of electrical isolation. IP55 helps resist workshop dust and water ingress during normal use but does not make the unit suitable for immersion or continuous water exposure. Route both cables away from blades, cutters, rotating parts, hot surfaces and walking areas. Before each use, inspect the housing, cables, plug, socket and mounting points for damage, looseness or exposed wiring. Stop using the unit if damage is found.