Noyafa Cable Fault Locator NF388, Network Cable Tester Wire Tracker with 8 Far-End Jacks and Port-Flash for Testing Ethernet LAN Network Cat5 Cat6 Phone Wire Coaxial Cable

• 【Multipurpose Cable Tracer】NF388 can test the Map, Tone, Track, Test, or Troubleshoot Phone, Coax, CAT5 or CAT6 cable. This set equips multiple tester ports (RJ45, Port-flash, RJ11 & BNC) and is designed to detect and test a wide range of cable and circuit status including 5E/6E, USB cable, coaxial cable, telephone wire, STP/UTP, jumper wire, open/short circuit, reverse connection . It can also be used to locate wiring errors and make dynamical cable length calibration and measurement.
• 【Tests Up to 8 Network Drops】Maps and Tests up to 8 Network Drops at a Time.It includes eight remotes that allow for the testing and mapping of eight wires at a time! Using the receivers built-In "Wire Map" feature technicians can see both the connected remote's number, and verify that all wires in both RJ45 plugs are seated and wired correctly. The eight included remotes have built-in speakers.When a remote is connected to the same wire as the receiver,the remote will pulse an audible tone.
• 【Scan Feature - Tracking Wire and Cable】The SCAN feature allows for tracing wires with the included inductive toner wand. While the NF388 is mainly designed for network installers, the receiver has four SCAN jacks including USB, BNC, RJ11/12, and RJ45 jack. When operated in SCAN mode, the receiver sends an inductive signal through these four jacks. The inductive wand will pick up this signal and emit an audible tone when in the vicinity of the cable, making it easy to follow and trace wires.
• 【Measures Distance - CAT5 and CAT6 Cable】Tracking & checking 5E, 6E, USB cable, coaxial cable and telephone line, open circuit, short circuit, jumper wire, reverse connection. If the need arises to troubleshoot a problematic wire, the receiver's "Pair & Length" feature will show the length of each connected pair.
• 【Checks Coaxial Cable Wiring Quickly】If your job requires you to work with various coax, the NF388 will map and test coaxial cable as well! Use the included RJ45 to BNC adapter on the transmitter, and connect the other end of your cable to the BNC on the remote. Within seconds you will find out if your cable is open or has a short!
• 【LCD Backlight & Port-Flash】Hub blink for locating network port by the flashing port light on Hub / Switch. The included inductive wand has a Push ON/OFF button on the side of it that illuminates two very bright LEDs mounted next to the toners tip. Additionally the wand has an adjustable volume control, and a headphone jack (headphones are included). Large LCD with backlight; Portable with long battery life (standby mode for over 50 hours); Auto time-delay shut off.

This set equips multiple tester ports (RJ45, RJ45 Loopback, RJ11 & BNC) and is designed to detect and test a wide range of cable and circuit status including 5E/6E, USB cable, coaxial cable, telephone wire, STP/UTP, jumper wire, open/short circuit, reverse connection . It can also be used to locate wiring errors and make dynamical cable length calibration and measurement. This instrument set is an ideal tool for technicians in installation and maintenance of weak current systems such as communication line and comprehensive wiring circuit. It is widely applicable to telephone systems, computer networks and other metal wire circuit and fields. With this set, only one person is enough to complete cable continuity check. Features: 8 far-end test jacks (ID1~ID8) included Multiple tester ports (RJ45, RJ45 Loopback, RJ11 & BNC) Complete the cable continuity check in a quick and easy way Tracking & checking 5E, 6E, USB cable, coaxial cable and telephone line, open circuit, short circuit, jumper wire, reverse connection Locating wiring or connection errors Determining cable length and distance of open circuit and short circuit Dynamically calibrating cable length and making length measurement as accurate as 97% Large LCD with backlight Portable with long battery life (standby mode for over 50 hours) Auto time-delay shut off Measuring length and determine the Determine the distance of open-circuit and short-circuit Locating cable with 8 far-end passive test jacks (ID 1- ID 8) Far-end recognizer with prompting voice Self-checking function and auto compensate any change in battery capacity or ambient temperature Single board computer software watchdog design and reliable operation Package: 1 x Main Tester 1 x Receiver 8 x Remote Identifiers with Far-end Test Jacks ID1- ID8 1 x Earphone 4 x Cables 1 x Carrying Bag 1 x Instruction Manual Standard factory package