Njl Waterproofing Tanking Kit One-Coat System for Wetrooms, Showers, Bathrooms, Kitchens, Flexible, Suitable for under floor heating 9kg

• High Performance One-Coat Waterproofing System: NJL Tanking Kit is a polymer emulsion-based product designed to provide waterproof protection to backgrounds in wet rooms, domestic bathrooms, kitchens and showers, commercial environments and is suitable for both walls and floors prior to tiling. It requires only one coat and is fast drying without the need to prime, for use on internal installations only
• Complete Kit Contents: Unit Size 9kg includes flexible waterproof coating and 10m membrane tape for comprehensive waterproofing coverage
• Fast Drying and Versatile Application: Fast drying formula suitable with underfloor heating, compatible with new brickwork, blockwork and concrete, timber walls and floors, and other boarded backgrounds
• Quick Installation and Coverage: Tile after 90 minutes drying time, suitable for both walls and floors with coverage of 8m² per 9kg bucket
• Flexible Waterproof Protection: Flexible coating system designed specifically for wetrooms, showers, bathrooms, and kitchens, providing reliable moisture barrier before tile installation

Njl Tanking Kit High Performance One-Coat System Wetrooms, Showers, Bathrooms, Domestic Kitchens 9kg NJL Tanking Kit is a high performance one coat system designed to provide waterproof protection to backgrounds in, Wet rooms, domestic bathrooms, kitchens and showers, commercial environments and is suitable for both walls and floors prior to tiling.NJL Tanking Kit is a polymer emulsion-based product for use on internal installations only. It requires only one coat and is fast drying without the need to prime. Unit Size: 9kg (includes flexible waterproof coating and 10m membrane tape) Colour: Blue Foot traffic: 90 minutes Drying time: 90 minutes Application temperatures: 5°C to 25°C' Coverage: 8m Before applying NJL Tanking Kit to your bathroom, wet room or shower, surface preparation is vital to ensure the area is free of contaminants and deliver maximum adhesion. SURFACE PREPARATION Ensure all areas are clean, dry, and free from dust or any other contaminating barriers, Remove any flaking or peeling layers. Background surfaces must be free from movement and made secure. New Brickwork, Blockwork and Concrete must be fully cured and dry, surfaces have to be reasonably flat. If applying to skim plaster ensure the plastered surface is fully cured and dust free, 14-28 days depending on temperature (with >0.5% moisture prior to application. If applying to concrete or anhydrite-type floors ensure the surface is fully cured and dust-free with readings less than 75% humidity. All surface laitance must be removed prior to application. Timber walls/floors, other boarded backgrounds: background must be clean and free from any loose debris and the surface must be sound, dry & flat. Boards should be firmly fixed to supporting joists and free from any excess or sudden movement. Please Note: Moisture sensitive backgrounds should be protected from moisture ingress from behind. APPLICATION NJL Tanking Kit should be applied using a brush or short pile roller to give a continuous thin layer of product at least 0.8mm thick. See application method. Drying time will be extended depending on thickness applied, porosity of background and temperature if less than 20°C. Apply coating to the junctions between wall to floor and wall to wall corners using a paint brush at coverage 1.1kg/ sqm. Bed a strip of membrane tape into the coating while still wet to strengthen and reinforce the junction points (adjoining boards). Tape can also be used to reinforce cracks, pipe entries and screw fixings. When dry (after 30 minutes), apply one uniform coat over the complete wall and floor area including reinforced areas in a continuous layer at a coverage of 1.1kg/ sqm using a paint brush or roller as previous. Allow 90 minutes drying time before commencing tiling.