Nexus ProJoint Titan Epoxy Jointing | A Quick And Easy Solution To Filling Joints Between Paving Slabs | 22.5kg - NEUTRAL

• Permeable bedding mix not required.
• Part mixed components for fast application, all supplied within the mixing tub.
• Professional strength, self-compacting and suitable for joint widths of 5mm upwards.
• Weed, pressure washer and also frost resistant.
• Suitable for natural stone and concrete paving, setts and slabs.
• NEXUS PROJOINT TITAN EPOXY JOINTING is not designed for porcelain paving
• Ideal for paths and patios as well as driveways or other vehicular areas (up to 10 tonnes)

Nexus ProJoint TITAN Epoxy Jointing, above all, offers a quick and easy solution to filling joints between paving slabs and setts. Perfect for areas of both vehicular access and general foot traffic. Suitable for natural stone and concrete paving, Nexus ProJoint TITAN Epoxy Jointing, besides being a high-strength two-part epoxy paving grout, is also very simple to use. Resin and sand are supplied ready-mixed within the tub, and only requires the addition of the enclosed hardener to activate the chemical cure. Once cured, ProJoint TITAN delivers a weed-free, frost-resistant joint which resists pressure washing. Key Facts For ProJoint Titan Epoxy Jointing: Permeable bedding mix not required. Part mixed components for fast application, all supplied within the mixing tub. Professional strength, self-compacting and suitable for joint widths of 5mm upwards. Weed, pressure washer and also frost resistant. Ideal for paths and patios as well as driveways or other vehicular areas (up to 10 tonnes). Suitable for natural stone and concrete paving, setts and slabs. Please Note: NEXUS PROJOINT TITAN EPOXY JOINTING is not designed for porcelain paving; however, if you are planning on using porcelain paving, please refer to PROJOINT RAPIDFLOW or GROUT. Specification System: 2-Part Epoxy Resin Jointing Compound For Natural Stone & Concrete Paving. Packaging: 22.5kg Kits. Coverage: Please See Technical Data Sheet Attached. Colours: Neutral, Mid-grey & Basalt. Walk On Curing Time: 12 Hours In Dry Ambient Conditions. Vehicle On Curing Time: 24hours In Dry Ambient Conditions. Full Strength: 28 Days. Compressive Strength (28 Days): 34.3n/mm². Flexural Strength (28 Days): 14.5n/mm². Maximum Vehicle Weight: 10 Tonnes. Sub-base Requirement: Full Solid Bed With Permeable Bedding Or Non-permeable Bedding Mortar, Specified For Intended Use. Storage & Shelf Life: Store In A Cool, Dry, And Frost Free Environment At Temperatures Between 5°c And 30°c. Shelf Life Is 12 Months From Date Of Manufacture.