NEWPACKAGING100% Total Transfer Red Tamper Proof Evident Security Void Tape - 50mm x 50m

• 【KEEP YOUR ASSETS 100% SECURED】: Extremly sticky voiding tape for total security. Compared with others’ only 50-60% partial transfer feature, our security prints or patterns will be 100% TOTALLY transferred to the application surface if tape is removed, this irreversible change provides remarkable evidence of unauthorized access, then keeping your asset 100% Secured. Works when frozen.
• 【NO WAITING PERIOD TO REVEAL “VOID”】: Security hidden message (e.g. "VOID/OPEN") will appear IMMEDIATELY if attempts are made at removal of tape, while other security tapes usually needed at least a few minutes to reveal "void" and they don't work frozen.
• 【COMPATIBLE WITH YOUR SURFACES】: Besides high energy surface, also including LOW energy surface such as pressed or uncoated paper board, light texture polypropylene, deep texture polypropylene, heat shrink film (PE; PVC), Stretch Wrap Film (LLDPE), Tyvek, Smooth finish Styrofoam, rough bare wood etc.

Extremly sticky Security Tape, which is ideal for protecting and tracking your assets during storage and transportation, should be applied to a clean & dry surface! Used to seal non-reusable boxes or packages, traces of security print or pattern will be totally transferred to the Carton/article surface if these security tapes are removed, and the hidden pattern of "OPENED OPENED" words will appear through the original carrier (a clear and dry film). If the activated tape is reapplied, the hidden pattern of "OPENED OPENED" words will appear through the tape surface too. Before applying the tape it is necessary: Shipping: Tapes must not be exposed to temperatures over 100°F (37°С) during shipment or storage. Temperatures over 100°F can damage the tapes and shorten the shelf life. We do not accept any responsibility for tapes exposed to temperatures over 100°F. Recommended Application: 1.If needed, clean the application surface with 90% Isopropyl Alcohol and kletting the surface dry completey prior to affixing the tape. 2.Apply security tape to the clean & dry surface at or above the recommended application temperature. Notes: On the recommended surfaces at 70°F, the tamper evident feature should be functional within 1 minute of application. Other surfaces or lower temperatures may require more curing time. If the tamper evident feature does not perform immediately, more curing time usually improves the performance of the tamper evident feature. For best results, allow 1 hour curing time after application. General Minimum Application Temperature: +40°F. General Service Temperature Range: -40°F to +160°F. Storage: 1.Storage Temperature: 40°F to 100°F. 2.Storage Humidity: 20% to 60%. 3.Minimum Shelf Life: 2 Years.