Mxfans Black Inline 100W Manual Light Knob Dimmer Switch for Lamps Lights Plastic

• 【Wide Application】: Suitable for kinds of lamps, electrical appliances, transformers, etc. that carry power cord control; You could use the dimmer with table lamps, floor lamps or pendant lights. Adjust the dimming button to customize the brightness, and create an optimal atmosphere in your room.
• 【Wiring Points】: 1. Do not expose too much copper wire, otherwise it will be easy to go without work, causing the switch to be burned; 2. The wire must not pass over the dimmer switch core, otherwise the wire will be broken and the adjustment switch will not work, causing the adjustment switch to burn out.
• 【Excellent Design】: The black switch will work well with your lamp, adding functionality to your lamp, meanwhile presenting beautiful appearance.
• 【Warm Reminder】: This product requires simple soldering by the buyer before it can be used normally.
• 【Soldering Steps】: 1: Solder the 2 ends of the brown wire to the 2 round holes of the dimmer switch core respectively; 2: After soldering, the wires pass through the side of the dimmer switch core; 3: Close the back cover and tighten 2 screws. Finally, the gear knob can be pressed up. Once assembled, it is ready to use.

Features: 1.Each qualify checked item with a unique Manufacturing Part Number label on the inner package to confirm if it is the authentic item sold from our store. 2.When you have any problems about your item, please send us the MPN label information first. 3.Connect it between the driver and the light and adjust the brighness with the manual knob. 4.Control the brightness of lights lighting. 5.Suitable for kinds of lamps, electrical appliances, transformers, etc. that carry power control lines. 6.This product requires simple soldering by the buyer before it can be used normally. Note:1.To ensure that you can use the dimmer correctly, please solder the dimmer according to the welding instructions. The electric welding principle explanation diagram is in the image display area. Soldering Instructions: 1. The soldering iron first. 2. The two copper wire ends that need to be soldered must be with solder paste or rosin. 3.This Dimmer Switch adopts triac, so there is no fixed soldering direction. It can be soldered from that end or another end, and there is no distinction of zero line and fire line. Note: this is only fit for 15-75W load. Specifications: Material:Plastic Color:Black Brand name: Mxfans Voltage:220V Power:100W Assembly method: welded type Size:7x3.3x3.4cm/2.76x1.3x1.34Inch(LxWxT) Weight:25g Package include: 1 x Manual Dimmer Switch