Mut 703001692 Motorized Ball Valve, 2 WAY 230 V AC

• Ball Valve Model vs 20 F-F V70 F 50s 230 V M1 1 piece.
• Model: VS 20 F-F V70 F 50s 230 V M1
• For heating/Air-conditioning systems and health
• Bindings G3/4 Female to Female
• With Micro auxiliary

The motorized ball valve is the most common device and used of interception or deviation of the flow in plumbing pipes. Its operation is based on the 90 ° Rotation of a shutter Cylindrical Ball Complete with a hole or more holes. The valve allows the passage or the total closure of the flow but in some cases also its adjustment. A full flow ball valve, that is, in which the diameter of passage is equal to the internal diameter of the tube upstream and downstream, presents a loss of load rather low and equal to that of the tube, if the valve is fully open. The valves may be to 2 way or 3 way. Technical Data Max Running angle: 90 ° Nominal Max Torque: 7 Nm vers, V70 F; 20 nm vers. v200 F supply voltage: 230 V AC or 24 VAC; 50/60 Hz Power consumption: 1.5 VA for version V70 F; 2 VA for version v200 F degree of protection IP 40 standards IEC 529 Ref European standards CEI EN 60529 reach of auxiliary contacts M1S (Optional): 3 A, 250 Vac Max. ambient temperature: 50 °C Operating Mode: 3 points, with SPDT control cable length: 1100 mm Insulation Class II Ref European standard EN 60730 Nominal pressure: PN16 switching time: from 50sec vers.V70 F; 120 seconds vers. v200 F flow of temperature limits: 5 ÷ 110 °C Max. differential pressure: 6 bar change: – Full Flow – 3 Way 2 way to full flow (via common common) or in by-pass (via central side): See description Model. Materials: Brass Valve Body and Ball lid and base Motor: PA self-extinguishing required: Teflon.