MS Clamp Connector Ceiling Angle with Inner Thread 1 Inch x Diameter 32 mm for PE Pipe

• Brass clamp connector for PE pressure pipe, ceiling angle with internal thread on one side, design: 1 inch internal thread x diameter 32 mm.
• Material: untreated brass, working pressure: 16 bar.
• Operating temperature: -20°C to max. 120 °C. Approvals: DVGW.
• These connectors can be used for plastic pipes (HDPE and NDPE) as drinking water pipes, in horticulture and for agricultural service water supplies. Suitable for piping systems underground or above ground for fixed or movable installation.
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Brass clamp connector for PE pressure pipe, ceiling angle with one-sided internal thread, design: 1 inch inner thread x diameter 32 mm, material: brass blank, working pressure: 16 bar, operating temperature: -20 °C to max. 120 °C approvals: DVGW. These connectors can be used for plastic pipes (HDPE and NDPE) as drinking water pipes, in horticulture and for agricultural household water supply. Suitable for piping systems under or above ground for fixed or movable installation. Note: After mounting the connectors and pipe installation, always a pressure sample (DIN4279) must be carried out. In the event of failure to implement and/or loss of written evidence, no damages will be accepted by the manufacturer.