Motul 101584 Car Engine Oil | Motul 8100 ECO-clean+ Fully Synthetic Petrol & Diesel Oil for Euro 4, 5 & 6 Engines | 100% Synthetic Engine Oil | Viscosity SAE J 300, 5W-30 | 5 Litres

• HIGH PERFORMANCE > Achieve the best performance for your Car with this 100% Synthetic and fuel economy Engine lubricant. This product brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption.
• USAGE > Designed for the latest generation cars, powered by Diesel and Gasoline engines, naturally aspirated or turbocharged, indirect or direct injection, Euro 4, 5 and 6 emission regulation compliant, requiring an ACEA C1 engine oil, low friction, low HTHS (< 3.5 mPa.s) viscosity oil and "Low SAPS" with reduced content of Sulfated Ash (≤ 0.5%), Phosphorus (≤ 0.05%) and Sulfur (≤ 0.2%).
• ECONOMICAL > Resilient to evaporation with all types of vehicles to reduce fuel consumption and lower the emission output
• COMPATIBILITY > This lubricant is specially designed for cars powered by Gasoline or diesel engines requiring ACEA C3 standard.
• MANUFACTURER APPROVAL > The different products of the 8100 families are designed to perfectly match the needs of the latest car generations and possess all relevant manufacturer approvals as well as many manufacturer recommendations. Drain interval: according to manufacturers’ recommendations and tune to your own use. Do not mix with lubricants not ACEA C2 compliant. Before use always refer to the owner manual or handbook of the vehicle.

Motul 101584 8100 ECO-clean+ 5W30 100% Synthetic Engine lubricant. High performance 100% Synthetic Fuel Economy Engine Oil specially designed for the latest generation cars, powered by Diesel and Gasoline engines, naturally aspirated or turbocharged, indirect or direct injection, Euro 4, 5 and 6 emission regulation compliant, requiring an ACEA C1 engine oil, low friction, low HTHS (<3.5 mPa.s) viscosity oil and "Low SAPS" with reduced content of Sulfated Ash (≤ 0.5%), Phosphorus (≤ 0.05%) and Sulfur (≤ 0.2%). Suitable for any type of Diesel and Gasoline engines calling for "Fuel Economy" lubricants: ACEA C1 standard. Compatible with catalytic converters and Diesel Particulate Filters (DPF). May be unsuitable for use in some engines. Always refer to the owner manual or handbook if in doubt.