MJJC Snow Foam Lance for Karcher K2 - K7 Foam Gun for All Karcher K Series Pressure Washers, Karcher Foam Cannon (PRO)

• We - Tucool Racing has already enrolled brand MJJC, and have been assigned the role of Administrator in Brand MJJC
• THIS FOAM LANCE JUST FOR KARCHER K2-K7, IT'S NOT FOR KARCHER K1700/K1800, IF YOUR MODEL IS KARCHER K1700/K1800, PLEASE BUY THE TYPE WITH ASIN B08FMDS2LT, THANKS.
• The product has been updated, the accessories come as shows in the photo, which according to our Amazon listing, please do not compare with other sites or videos, thanks.
• Newest 2.0 Version; Patented MJJC Cap. Capability: Home, HD, Professional. Adjustable Spray Fan Thick Foam; Adjustable Foam Density
• One 1.25mm Assembled Nozzle Orifice; Come with one Spare 1.1mm Nozzle; DON'T Come with 1.35mm Nozzle.
• Working Pressure psi: 1300-3600psi; Working Pressure Bar: 90-250Bar
• Note: 1.25mm orifice nozzle, working with as low as 90 Bar (1300psi) pressure washers. If you want to replace on the 1.1mm orifice nozzle, make sure your pressure washer is between 90-110Bar (1300-1600psi) pressure. To use with over 150Bar (2200psi) pressure washer, you must replace on the 1.35mm orifice nozzle (which needs to be purchased separately ASIN B09ZKXLH8Z)
• Please contact us freely for any questions or concerns, we'll get back to you within 24 hours and are always here to solve any problem for you, thanks.

MJJC Foam Gun for Karcher K2 - K7 Snow Foam Lance for all Karcher K Series, Pressure Washer Karcher. Specifications: Pressure range: 2000 psi - 5000 psi. Durability: 10 years. - - Capacity of bottle: 1000 ml (1 L). Construction material: Solid brass, resistant nylon, and HDPE bottle. Maximum water temperature: 60°C. Chemical resistant: Yes. Foam consumption adjustable: Yes. Spray width adjustable: Yes. How to use: 1. Put PTFE tape on the brass tube (two threads), each thread needs 50 cm of PTFE tape. 2. Put the adapter with brass tube and suction tube on the foam lance unit. 3. Fill fluid bottle with your desired amount of shampoo. 4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo + 80% water is recommended). 5. Shake the fluid bottle to mix the shampoo with water thoroughly. 6. Attach fluid bottle to foam lance unit. 7. Attach the adapter to the pressure washer gun and then it is ready for use.