MIIWWOWO 2 Stroke Outboard Motor 52cc 3.5HP Petrol Boat Engine CDI Ignition Manual Start 5000rpm Air-Cooled with 3-Blade Propeller for Inflatable Fishing Dinghy Small Boat

• 👍️【High Quality Aluminium Build】- This outboard motor features a high-quality aluminium alloy construction with anti-corrosion and anti-rust properties. The petrol boat engine withstands freshwater and saltwater exposure, supporting long-term durability for fishing and recreational boating.
• 👍️【Powerful 3.5HP Performance】- Driven by a 52cc 2-stroke engine delivering 2.5 kW (3.5HP) at 4000-5000 rpm, this 2-stroke outboard motor provides ample thrust for small boats. The 3-blade propeller with streamlined design reduces water resistance, achieving speeds up to 12 km/h with four passengers aboard.
• 👍️【CDI Ignition and Quick Start】- The CDI ignition system enables fast and consistent starting with reduced effort compared to conventional systems. The manual start mechanism and ergonomic rubber grip handle provide straightforward pull-start operation. This small outboard motor is ready to run after a short pull.
• 👍️【Effective Cooling System】- Heat dissipation vents in the engine casing and a semi-air-cooled design work together to manage operating temperatures during extended use. This petrol outboard motor maintains consistent performance and reduces the likelihood of overheating during longer fishing trips or coastal explorations.
• 👍️【Low Consumption and Easy Mounting】- Efficient 2-stroke combustion provides extended range with modest fuel usage. The included mounting bracket secures the engine firmly to the transom of inflatable boats, iron boats, plastic boats, fibreglass boats, and wooden boats. An anti-ventilation plate helps maintain stable water flow around the propeller.

With a sturdy and powerful propeller and precise speed control, this outboard motor is a capable helper for your time on the water. It is straightforward to operate, allowing you to fish and explore outdoors at an efficient speed. Application This outboard motor is suitable for small boats of various materials, including inflatable boats, iron boats, plastic boats, fibreglass boats, and wooden boats. It is widely used in fishery, aquaculture, and outdoor exploration. Specifications Type: 2-Stroke Ignition System: CDI System Starting System: Manual Start Recommended Fuel: Regular Unleaded Gasoline Speed: 12km/h(Four People) Maximum Output: 2.5kw(3.5hp) Full Throttle Operating Range: 4000-5000r/Min Propeller Mark: 7-1/45-a(Inch) The Engine And The Propeller Ratio: 2: 1 Fuel To Oil Ratio: 35:1 Gear Ratio: 27/13 Product Size: 90*38*18cm/35.4*15*7in Propeller Length: 18cm/7.09in Adjustment Rod Length: 40cm/15.75in Engine Height: 16cm/6.30in Gross Weight: 13kg/28.66lbs Package Size: 95*31*44cm/37.40*12.20*17.32in Package Included 1x Outboard Motor 1x Water Pump Impeller 1x Starter 1x Funnel 1x Fuel Oil Mixing Bottle 1x English Instruction All Tools Needed for Assembly Notes 1.Please note that it cannot be started on shore. 2.After use, please wash the outboard engine with fresh water and cool the waterway with fresh water. 3.Please do not leave the outboard engine outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port and cause engine failure. 4.The engine should be stored in a humid and ventilated place, avoiding direct exposure to sunlight. Before long-term storage, the gasoline in the fuel tank should be thoroughly removed. 5.Please note that it can not be started on shore, please pull the pulling plate firmly. 6.Please allow slight color difference caused by shooting light and 1 cm error caused by manual measurement, and make sure you don't mind before ordering. 7.Two-stroke air-cooled engines must use TCW-2 engine oil, which must be specifically designed for outboard engines. 8.Fuel mixture ratio: 25:1 for the first 50 hours, 50:1 after 50 hours. 9.Two-stroke outboard engines must use a mixture of 92# gasoline and two-stroke engine oil. 10.During the break-in period, the volume ratio of gasoline to oil is 25:1. 11.After the break-in period, the volume ratio of gasoline to oil is 50:1. 12.Important note: Gasoline and oil must be pre-mixed and thoroughly stirred before being poured into the fuel tank. 13.The outboard motor must be started in water, please do not start the engine on land. 14.When starting the engine, loosen the vent screw on the fuel tank cap counterclockwise. 15.When starting the outboard motor, insert the emergency stop rope and secure the other end to your wrist or belt 16. The break-in period lasts approximately 10 hours or one month. Please avoid operating the engine at high throttle during the break-in period. 17.After the break-in period, replace the gear oil. The second replacement should be performed after approximately 100 hours or six months.