Merten KNX DALI GATEWAY WITH 4 1/16 (64) 64/IP1, Light Grey, MEG6725 0001

• Bus System Interface/Media Gateway
• Box contents: Merten MEG6725-0001 KNX Dali gateway REG-K/1/16(64)/64/IP1, light grey

The KNX Dali gateway connects KNX to the Dali bus. The Gateway is a category I control unit with integrated DALI power supply for the EVGs. Up to 64 EVGs can be switched and dimmed in 16 groups and controlled over 16 scenes. In addition, the 64 EVGs can be controlled individually via KNX or summarised via KNX group addresses. Error messages of the individual ECGs or each connected bulb can be sent to the KNX and visualised. The DALI commissioning and configuration, group assignment and scene setting can be carried out via the device (display and optional lockable control buttons). - the integrated web server. With integrated bus coupler. For mounting on DIN rails TH35 according to EN 60715. The bus connection is via a bus connection terminal, a data rail is not required. KNX software functions: switch, dimming and value object per group and ECG. Stair light time function. Status objects Delays between feedback Detailed error messages per ECG and group. Two separate user profiles with your own password. Test by DALI-EVGs for emergency lighting with central battery or built-in battery with selectable test intervals. Parallel broadcast control of all ECGs, on/off brightness and on/off dimming speed. Dimming speeds for relative dimming and dimming values. Dimming value max./min. Different modes (normal, permanent, night, panic). Effect module with 16 effects and a total of up to 500 steps. Operating hour meter and stove-in mechanism per ECG. Features: web server: access via a PC, PDAs or web via the LAN network. With a WiFi converter, the start-up is also easier. The internal websites allow the device to be used and configured, operate or display all important functions. -Configure: scenes, effects, service, maintenance, burn-in, operating hours. -Operation: device, EVGs and groups. -Display: status and error messages. Supply voltage: AC/DC 100-240V, 50/60Hz. Outputs: Dali D+, D, DC 16-18 V (basic insulation, no SELV), max. 250mA Short Circuit Resistant Interfaces: KNX, Ethernet RJ-45, DALI Type: Category I (Single Master) control unit Connection cross section: supply or DALI: 1.5-2.5 mm². Protection class: IP 20. Device width: 4 TE = approx. 72mm Box contents: with bus terminal Colour: light grey.