Melairya Water Barrier For Sink, Kitchen Splash Guard,Shower Corner Water Guard For Bathtub Edge, Water Dam Strip For Countertop,Frameless Shower Threshold Water Stopper For Bathroom

• 【High quality material】The shower door threshold is made of high-quality silicone, safe, durable and waterproof, can be cut to size you need with a sharp knife
• 【Water Guard For Sink】 The height of the splash guard is 3cm. It is suitable for the edge of kitchen sink countertop to prevent water from overflowing and dripping on the floor or wetting clothes
• 【Easy to Install】 Clean and dry the surface, peel off the self-adhesive strip and press the surface. In order to strengthen the fixing and waterproof effect, please use the clear silicone caulk to seal the bottom edge. Must caulk all the way around the edges or seals to avoid water leakage
• 【Multi-Purpose Use】This water strip dam is a very nice accessory for kitchen and bathroom, Installed around the countertop, sink and tub, it can prevent the water flow into floor. And as the shower threshold water dam, it's easy to realize dry-wet separation for your bathroom
• 【After-sales guarantee】We promise to provide quality products! For any quality issues, please resend a new or unconditional full refund. Customer satisfaction is our tireless pursuit

Are you still annoyed by the overflow of water from the sink? Are you still worrying about water leakage in the shower or bathroom because the threshold is not high enough? You can try to install this water guard at the bottom of the window sill, the gap between the grass sill, the joint and the periphery of the washstand and the wall. While solving the water leakage problem, it also beautified the decoration. Material: Silicone Width: 1.6cm Height: 3cm Length: 50cm , 60cm , 70cm , 80cm , 90cm , 100cm , 110cm , 120cm , 130cm , 140cm , 150cm , 160cm , 170cm , 180cm , 190cm , 200cm , 210cm , 220cm , 230cm , 240cm , 250cm , 260cm , 270cm , 280cm , 290cm , 300cm Color: White , Pink , Grey , Blue , Green Package includes: 1 *Water barrier threshold Installation Steps: 1. Clean and measure Mark the position where the mark needs to be installed and cut it to the required length. 2. Peel off the sticker Remove the adhesive and install the sill at the marked location. 3. Fixed water dam Place the shower dam in the position where it needs to be installed. Press hard while tearing off the adhesive. 4. Reinforce with glue Apply glue to the joints between the two ends of the shower dam and the desktop/ground. Keep dry within 24 hours after installation. Notes: 1. In order to strengthen the fixing and waterproof effect, it will be better to use glass glue to seal the bottom edge after the adhesive. Must caulk all the way around the edges or seals to avoid water leakage.（glass glue not included） 2. Due to different displays and lighting effects, the actual color of the item may be slightly different from the color shown in the picture. 3. Due to manual measurement, a measurement deviation of 1-3cm is allowed.