Mars Outpost Adjustable Wall Mount Bracket for DVR NVR Router Modem

• FITS DEVICES 17 TO 54MM THICK - That is 0.7 to 2.1 inches. Suits broadband routers, modems, network switches, mini PCs and compact CCTV recorders from Hikvision, Dahua, Hilook and Swann. Measure first.
• NO WIDTH LIMIT - You set how far apart the two lower clamps sit, so long or wide kit stays level and fully supported. Fixed-width cradles cannot do this. Ideal for routers, modems and switches.
• WALL, CABINET OR UNDER DESK - Screws to any flat surface in any orientation. Wall screws and plugs included, plus three spacers so slimmer boxes grip firmly instead of rattling loose.
• ONE MOUNT, THREE PARTS - Two clamps carry the weight underneath while the third holds the top edge back against the wall, so the device sits flush and will not tip forward.
• PLASTIC, NOT METAL - Precision 3D printed in the UK from tough engineered polymer. Light, will not corrode, and made for light equipment such as routers, modems, switches and mini PCs.

A wall mount that adapts to your kit, not the other way round. Most brackets are moulded for one device. This is a three-part system: two clamps sit under the device and carry its weight, and a third holds the top edge back against the wall. You decide how far apart the lower clamps go, so a long router or a wide switch sits level and fully supported. Fits devices 17-54mm (0.7" - 2.1") thick Mounts on a wall, inside a cabinet, or upside down under a desk Three spacers included so slimmer boxes grip firmly Wall screws and plugs included 3D printed in the UK from tough engineered polymer Measure before you order. Check your device at its deepest point. If it is over 54mm, choose the Large size instead.