MAPEI Ultracare FUGA Fresca Fresh Escape 103 Moon White Polymer Paint to Renew The Color of Cement Joints Bottle 160 gr.

• Polymer paint to renew or replace the color of cement joints of floors or interior coatings. We do not recommend outdoor use.
• Quick and easy application thanks to the convenient dosing bottle. Shake/mix before use
• Excellent covering effect
• Protects joints and makes routine cleaning easier
• Available in 52 colours from the Mapei colour range

UltraCare Fuga Fresca is a ready-to-use paint that allows you to renew and modify the color of cement joints of floors and coatings inside in a quick and easy way. UltraCare Fuga Fresca is used to eliminate inhomogeneity of color of the joints determined, for example, by an incorrect execution of the same or to eliminate unsightly stains resulting from use. TECHNICAL CHARACTERISTICS: Thanks to its special characteristics and its excellent covering power, it allows to obtain uniform color joints, with a lower absorption of water and, therefore, easier cleanability. IMPORTANT NOTICES: Do not use outside or on surfaces subject to continuous immersion (swimming pools, tubs, etc.).In the case of terracotta floors and coatings or stone materials with porous and absorbent surface, the product should be applied only on joints to avoid staining.Apply the product to fully seasoned cement joints (time varying depending on the specific type of escape). Do not use on epoxy grout mortars or on fractionation joints sealed with silicone or polyurethane products.Do not use as a consolidator of inconsistent joints and with lack of mechanical performance as a result of incorrect hydration.In case of contrast between old and new color may require more treatments. Shake the bottle before use. Remove the cap and apply the product by applying pressure with the special sponge on the surface of the joints clean and free of insubstantial parts, mold and limescale deposits. Wait a few minutes for the product applied to the joints to appear dry (depending on environmental conditions). Next, remove with a moistened sponge any burrs on the tiles. After use, wash the dispenser bottle sponge thoroughly.