Manual Transfer Switch 40A 4P + 4P MTS AC Automatic Magnetic Thermal Modular Switch

• The rail mounted dual energy conversion isolation switch has four functions for switching on/off, conversion and insulation. Can be freely switched between two loads carried by a group of lines or on and off on two power supplies
• The 40 amp 4 pole dual power manual transfer switch is an essential safety device to ensure electrical energy is transferred safely and without interruption between two circuits. It is ideal for applications where fast and reliable switching between circuits in one unit is required
• Used to turn on and off, using standard DIN rail installation (35×7.5), the housing is made of PA66 injection molding, with high flame retardant performance
• It is an ideal product that needs to be used for changing and opening and closing in industrial equipment and circuits. It is convenient and safe to install and wire to the guide rail
• Manual transfer switch 1P (MTS) 1. When the handle is connected in position I: 1 and 2. 2. When the handle is connected in position II 1 and 4. 3. When the handle is in the middle position: both groups are separated

A toggle switch is designed for transferring power from a home or business from the commercial grid to a local generator when a failure occurs, also known as a transfer switch. It is connected directly to the commercial power supply or power line of the generator and the house. The rail mounted dual energy conversion isolation switch has four functions for switching on/off, conversion and insulation. Can be freely switched on and off between two loads carried by a group of wires or on two power supplies. It is a magnetothermal switch for two mutually exclusive circuits, meaning it supplies (and protects) one circuit at once. Useful in cases where only one circuit is needed and it is impossible for another connected to the same magnetotherm to have power. It is used to turn on and off and switch between using standard DIN rail installation (35×7.5). The housing is made of PA66 injection molding, with high flame retardant performance, is an ideal product that should be used for changing and opening and closing in industrial equipment and circuits. The maximum current can reach 40A, and it is convenient and safe to install and wire on the guide rail. Features: Function to display contact position. Support 35mm DIN rail installation. Supports the type of protruding upper and lower incoming wiring or the upper incoming and outgoing lower wiring type. Able to select electrical accessories and achieve a remote display of MCB status: open, close and failure trigger. Can select electrical accessories and perform MCB low voltage and surge protection as well as remote branch triggers.