Manrose CFD200SN Inline Centrifugal Duct Fan - (Standard Model - NO TIMER)

• Standard Model - NO over run timer
• Built in back draught shutter
• Designed to be connected to an inlet and outlet with flexible ducting

Product Description Manrose CFD200 Inline Centrifugal Duct Fan,In Line Extractor Fan. Designed to be connected to an inlet and outlet with flexible ducting (not supplied) Built in over-run timer continues to operate fan for pre-set time after light switch is turned off 100mm exhaust. Will perform up to 10m run. Built in back draught shutter. Performance: 31 litres per second, 110m3 per hour. Noise level : 45dB(A) 17 Watt Power Consumption,Designed for use with suspended ceilings, the Manrose CFD200 can be used in a wide range of domestic, commercial and industrial applications, particularly where only a 100mm ducting can be installed. Powerful, yet quiet and unobtrusive, the CFD200 has an extract rate of 110m3/hr 31 litres per second and will extract through ducting up to 10m long,No Bracket Supplied with this model, please see CFD200S or CFD200T,Manufactured using High Impact ABS Thermoplastic for stength and durability Supplied with,Fitted with backward curved centrifugal impellers for a large airflow against the high pressures caused by longer lengths of ducting and resistance by grilles,Requires three wires: permanent phase, switched phase, neutral,Power to the CFD200 is provided by a single phase (consuming 45W) induction motor with pre-oiled bearings for a long, maintenance-free life,Design to comply with the 2006 Building Regulations on Ventilation (F1),A spring operated Non return flap built in to the discharge spigot to prevent Back Draughts,Product Specifications ,Energy Type: 220-224V - AC.50Hz,Maximum Pressure 120 p.a,Fan Speed: 1400 r.p.m,Sound Volume: 45.0 dB(A),Maximum Operating Temperature 40oC,Cutout: 100mm,Width: 258mm,Height: 195mm,Finish White (internal grille),Grey (external grille) Box Contains 1 x Inline Centrifugal Duct fan