Magnetic Shower Seals | Sold in Pairs | Fits 4, 5 or 6mm Glass | 135° Magnet for Straight or Quadrant Doors with a 30mm Gap | 2 Metres Long | MAG036 (200cm)

• Pair of Magnetic Door Seals for 4, 5 or 6mm glass doors
• Can be used on straight, curved or quadrant sliding doors
• Will close a gap between two doors of up to 30mm
• Can be used vertically or horizontally
• Simply turn one seal up the other way to alter if the seals come together straight or at a slight angle

MAG036 - Choose from either 25mm or 2m long, these are sold as pairs This listing is for a pair of magnetic door seals that fit over the glass on shower doors with 4, 5 or 6mm glass. The magnets are made at a slight angle meaning that they can be used on either sliding doors that come together straight, or if you turn one seal up the other way they come together at a slight angle which then makes them suitable for sliding doors on quadrant shower enclosures. The maximum gap they can span between to glass doors is 30mm. To check if you remove the old magnetic seals from your shower door, close the doors and measure the gap between the two doors when in the closed position, as long as the gap between the two glass doors is 30mm or less then they should fit fine. These seals fit all types of straight or quadrant sliding doors with the above measurements. Please note they are not suitable for pivot doors that close at an angle of 90 degrees. You would need our MAG004 for this situation. Simply remove your old magnetic seals from the glass, cut the new magnetic seal to length, turn the seals over to make them suitable for either a straight or quadrant door and push the new magnetic seal on to the glass doors.