M6 M8 M10 M12 M16 Lipped Drop In Wall Wedge Expansion Anchor Masonry Brick Concrete Anchors Metric (10, M16-16mm)

• Lipped Drop-In Anchors work by pre drilling the hole, dropping the anchor in and then using the setting tool to create the expansion for securing the bolt. This anchorage system then allows you to remove the bolt if needed and leaves the anchor in place and not visible if you choose not to replace the permanent fixing. Zinc Plated. Threads are the standard metric
• An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete. Standard version can be inserted below the surface. Also known as wedge anchors.
• All steel, non-flammable fixing conforming to BS 7671 standard's 18th edition, which requires wiring systems to be supported by materials which are unlikely to prematurely collapse in the event of a fire.
• Lipped. Zinc Plated Carbon Steel.
• Sizes: M6, M8, M10, M12 & M16

Product description M6 M8 M10 M12 M16 Lipped Drop-in Anchors For Masonry Zinc Plated Threads are the standard metric M6 x 1.00 mm pitch inner diameter - 6mm (fit bolts M6) outer diameter - 8mm length - 25mm M8 x 1.25 mm pitch inner diameter - 8mm (fit bolts M8) outer diameter - 10mm length - 30mm M10 x 1.50 mm pitch inner diameter - 10mm (fit bolts M10) outer diameter - 12mm length - 40mm M12 x 1.75 mm pitch inner diameter - 12mm (fit bolts M12) outer diameter - 16mm length - 50mm M16 x 2 mm pitch inner diameter - 16mm (fit bolts M16) outer diameter - 20mm length - 65mm. M6 -6mm, M8 - 8mm, M10 - 10mm, M12 - 12mm, M16 - 16mm. Lipped Drop In Wall Anchor. Drop-In anchors should only be used in solid concrete. Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. Lipped Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. Lipped Drop-in anchors require a setting tool to install. If you do not have a setting tool, be sure to purchase one. USES: Lipped Drop-In anchors should only be used in solid concrete. Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. A setting tool is required to set the anchor in the concrete. INSTALLATION As with all female type anchors, the designated diameter of the Drop-In anchor refers to the side diameter of the anchor. The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete. Minimum embedment for each diameter of Drop-In anchor is the length of the anchor. The Drop-In Anchor requires the bottom of the hole to set the anchor. First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the Drop-In anchor is fully set. Drop-In Anchors work by pre drilling the hole, dropping the anchor in and then using the setting tool to create the expansion for securing the bolt. This anchorage system then allows you to remove the bolt if needed and leaves the anchor in place and not visible if you choose not to replace the permanent fixing. Zinc Plated. Threads are the standard metric An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete. Standard version can be inserted below the surface. Also known as wedge anchors. All steel, non-flammable fixing conforming to BS 7671 standard's 18th edition, which requires wiring systems to be supported by materials which are unlikely to prematurely collapse in the event of a fire. Lipped. Zinc Plated Carbon Steel. Sizes: M6, M8, M10, M12 & M16 Legal Disclaimer Always consult a professional