LTP Porcelain Tile Enhancer - A low maintenance film forming protector for Porcelain Paving | Enhances and embellishes the appearance | Leaves surfaces with a ‘just washed’ look (1L)

• 🔵 SURFACE FINISH: Delivers a subtle sheen that gives porcelain tiles a perpetually clean, 'just-washed' appearance. Water Based Self-Shine Enhancer for Porcelain Tiles & Pavers.
• 🌟 APPEARANCE ENHANCEMENT: Creates an attractive finish that highlights the natural beauty of porcelain surfaces. Enhances and embellishes - A low maintenance film forming surface sealer & protector.
• ☝️UV RESISTANT & BREATHABLE. Resistant to wear and stains Suitable for use in both domestic and commercial environments; Creates a durable wear layer.
• ✅ PROTECTIVE COATING: Forms a durable film barrier that guards against wear, stains, and daily deterioration. Minimal change to slip resistance. Environmentally friendly
• ✨EASY MAINTENANCE: Simplifies regular cleaning routines while maintaining a fresh, well-maintained appearance. AFTERCARE; Maintain Enhanced floors with LTP Porcelain Floor Tile Cleaner.
• 🌟 VERSATILE USE: Suitable for both interior and exterior porcelain tiles, providing effective surface protection and enhancement. Coverage: Square Metre Per Coat; Lower porosity surfaces – 1LTR 30-40m², 5LTR 150-200m². Shelf Life – Up to 2 years for un-opened containers.
• ✅✔️ APPLICATION: Apply using LTP Application Pack, a foam roller, Paint Brush or a sealant applicator pad. Application Tools link ; https://www.amazon.co.uk/gp/product/B00H1QPZWE?th=1 Sealer Pack at Link; https://www.amazon.co.uk/LTP-Sealer-Pack-applicator-Applicator/dp/B08GL935M2/

A low maintenance film forming surface sealer & protector. Enhances and embellishes the appearance. Highly resistant to wear and stains. Facilitates maintenance and cleaning. Leaves surfaces with a ‘just washed’ look. Directions for use For application and cleaning tools see Amazon ASIN; B08GL935M2 Preparation: Newly installed surfaces - ensure surface to be treated is completely clean, dry and free from cement and grout stain (see LTP Cement, Grout & Salt Remover). Existing surfaces - first clean and degrease surfaces with LTP Grimex Intensive Cleaner and rinse well. Leave to dry out thoroughly (24 hrs). Application: Clean and dry surface - apply using a foam roller, sealant applicator pad or paint brush. Pour contents into a separate container or dip tray. Apply to the surface without rubbing until an evenly thin film is created. Allow to dry (1 hr). For a more enhanced appearance further coats should be applied at right angles to the first (max.4). Do not over apply as a heavy layer or too many coats may cause unsightly build up/affect slip resistance and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully resistant. Always test first to establish the correct method of application and optimum number of coats before general use. Avoid extremes of temperature. Surface temperature range for application between 5ºC - 25ºC