LOTUS POWER Replacement Mini Car Booster Cable Car Battery Clamps Battery Clips for Emergency Car Jump Starter Cables

• 1.Warning: This cable can only support EC-5 interface. Before buy, you must make sure your jump starter uses EC-5,or it will conflict and waste your time and money.
• 2.Warning: This smart cable can support Peak Current less than 300A. Before buy, you must make sure your jump starter peak current is less than 300A, or it will not support.
• 3.Anti-short connection protection: Connect the red clip with the black clip, when the power is on, no damage, no sparkle
• 4.Anti-reverse charging protection: After the car is started, anti-reverse charge current is less than 1A.
• 5. All copper material to ensure the best quality and safety protection.

Warning: 1.This cable can only support EC-5 interface. Before buy, you must make sure your jump starter uses EC-5, or it will conflict and waste your time and money. 2.This smart cable can support Peak Current less than 300A. Before buy, you must make sure your jump starter peak current is less than 300A, or it will not support. Features: 1.Anti-short connection protection: Connect the red clip with the black clip, when the power is on, no damage, no sparkle. 2.Anti-reverse charging protection: After the car is started, anti-reverse charge current is less than 1A. 3.Full copper material to ensure the best quality and safety protection. 4.Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red+Black; EC5 Male plastic shell blue, fits 5mm Banana plug. Instructions for use: 1.Connect the red and black battery clips to the positive and negative of car battery. 2. Insert plug of battery clips into start outlet of start power. 3. Turn auto key to start shift to start auto. 4. If the auto can not be started, turn the key after several seconds until it is started successfully. 5. Afterwards, pull storage battery plug from start power and remove clip from auto battery.