Li-ion Charging Module TP4056 + DW01, 1A Charging Current, MicroUSB for 3.7V LiIon Battery/LiPo Batteries/1-Cell Battery/Single Cell Battery(MicroUSB with DW01 protection IC)

• ✅ CONSTANT CHARGING - with voltage of 4.2V for single-cell Li-ion and LiPoly batteries. 1A charging current, max. Input voltage of 8V
• ✅CHARGING DETECTION - if the charging current drops to 100mA, the charging process is ended.
• ✅PROVIDES PROTECTION FOR BATTERY - With its integrated protection against overcharge or deep discharge, the DW01 chipset independently disconnects via a MOSFET.
• ✅ INPUT VOLTAGE - the input voltage can be applied via the contact surfaces IN + and IN- or via the micro USB port.
• ✅ 100% satisfaction</b> we are very confident to deliver you 100% satisfaction! Our products are made out of high excellency and quality at a friendly price!

Li-Ion Charging Module TP4056 with Battery Protection, 1A, MicroUSB This charger is made for single cell Li-ion batteries which are charged with 4.2 V. The TP4056 chipset is a constant-voltage/constant-current charger. The on-board DW01 battery protection IC disconnects the battery on overcurrent, overcharge and on overdischarge. A full charge is detected as soon as the current drops below 100 mA. The charging is automatically terminated by the TP4056. Specification: Input Voltage: up to 8 V max. Charging Current: ca. 1 A Display: 2 LEDs Connection: Connection Pads for Input/Output Voltages and Battery, MicroUSB Dimensions: 26.3 mm x 17.1 mm x 5.6 mm