LED Strip Lights for Acoustic Wall Panels, 6 x 150 cm Embedded LED Light

• LED Strip for Acoustic Wall Panels: The black 12 × 12 mm silicone led wall lights sits inside compatible acoustic-panel or wood-slat grooves for a flush appearance. These black LED strip lights use clips and screws rather than adhesive, so fitting does not depend on tape bonding.
• Adjustable brightness: These acoustic wall panel lights complement wooden slats while reducing the visibility of individual LED points and are intended for indoor decorative lighting. The silicone covering diffuses the LEDs into a continuous 3000K warm-white line. Brightness can be set from 0% to 100%.
• Dimmable Touch Sensor Switch: A short press turns the lights on or off, while a long press adjusts the brightness level. The sensor can be installed on panels or walls up to 2 cm thick, acoustic panel lights measuring 1.2 cm / 0.47 inches in width, creating a warm, inviting and pleasant ambiance. with an indicated remote range of up to 15 metres in an open, unobstructed room. If the tactile sensor does not respond, please check if it needs to be charged or if the transmitter is installed.
• Flexible and cuttable: Our LED lights for slat wall can follow gentle curves and may be shortened only at the marked cutting points. The acoustic panel LED strip housing is rated IP54; disconnect the power before cutting, connecting or installing the lights. 12mm strips suit standard slat gaps. Use 3 mounting clips per strip (top/middle/bottom) to lock into panel slots.
• Versatile Applications: This wall panel LED lighting strip kit contains eight 150 cm light sections, approximately 2 m connection leads, touch control, clips, screws and UK plug. LED lights for acoustic wall panels installations in living rooms, bedrooms, studies and music rooms.

This warm LED lighting kit is designed for recessed installation in compatible acoustic wall panels, wooden slat walls and decorative panel grooves. The black silicone profile blends with darker gaps between wooden slats, creating a discreet finish when the lights are switched off and a continuous illuminated line when in use. Four size and quantity options are available: 6 lights, each approximately 70 cm long 8 lights, each approximately 70 cm long 6 lights, each approximately 150 cm long 8 lights, each approximately 150 cm long Please select the required variation before ordering. The quantity and light length supplied correspond to the variation shown on the product detail page. Each acoustic panel LED strip has an external profile measuring approximately 12 x 12 mm. Measure the grooves in the intended installation surface before fitting. The LED lights for acoustic wall panels emit a 3000K warm-white light intended for decorative indoor illumination. The silicone diffuser helps soften the appearance of individual LED points, making the kit suitable for living rooms, bedrooms, studies, home offices, music rooms and television feature walls. Product information: Available light lengths: approximately 70 cm or 150 cm per section Available quantities: 6 or 8 light sections Profile dimensions: approximately 12 x 12 mm Light colour: 3000K warm white Brightness range: approximately 20% to 100% Control methods: touch control and 2.4 GHz remote control Remote-control range: up to approximately 15 m in an open, unobstructed space Connection lead length: approximately 2 m / 6.56 ft Light housing colour: black Light profile material: flexible silicone Light profile rating: IP54 Power connection: UK plug Intended use: indoor decorative lighting The acoustic panel lighting can be operated using the supplied touch control or remote control. Switch the lights on or off and adjust the brightness to suit the room and time of day. The actual remote range may vary depending on walls, furniture, other electronic devices and the position of the receiver. The flexible black LED strip lights can follow gentle curves and may be shortened only at the designated cutting positions. Disconnect the power supply before measuring, cutting or connecting any section. Cutting outside the marked positions may prevent the light from operating correctly. Installation uses the supplied clips and screws rather than a self-adhesive backing. Position the clips inside a compatible panel groove, secure them to the mounting surface and press the silicone light profile into place. Check that every connector is fully inserted before switching on the system. Loose connections may cause intermittent illumination. The wall panel LED lighting strip kit is supplied with the light sections selected, connection leads, mounting clips, screws, touch control and a UK plug. The acoustic panels, wooden slats, installation tools and decorative furniture shown in the images are not included. The IP54 rating applies to the silicone light profile and does not mean that the complete electrical system is suitable for outdoor use or immersion. Do not install the system in bathrooms, outdoor areas or locations exposed to persistent moisture unless the installation has been assessed by a suitably qualified person. Before installation, lay out the lights and test every section. Allow adequate ventilation around the power components and avoid placing cables where they may be pinched or damaged. Clean the light surface with a soft, dry cloth after disconnecting the power. Do not use abrasive cleaners or immerse any component in water. If you encounter any issues, please feel free to contact us at any time, and we will get back to you within 24 hours.