LED Strip Lights for Acoustic Wall Panels, 4x1M RGB Acoustic Panels Embedded LED Light Strips, White LED Wall Lights for Wood Slat&Kitchen Cabinets, App & 2.4G Remote Control, Music Sync, Cuttable

• Slat Wall Optimised Fit: This set of acoustic wall panel lights is designed to fit standard groove dimensions of slatted wall systems(100 cm/39.37in long, 12 x 12 mm/0.47 x 0.47in cross-section).As a complete wall panel led lighting strip kit, it is compatible with most acoustic wall panels, wooden slats wall panel designs and media wall structures. The slim neon profile sits flush within panel channels for a tidy, integrated finish.
• Music Sync & Dynamic Modes: These wall panel lights respond to ambient music and sound by adjusting colour and pace in real time. The led wall panel lighting strip set includes over 40 pre-set dynamic lighting modes to suit different room atmospheres. They are suitable as media wall lights alongside television units and feature wall setups.
• Dual App & Remote Control: These acoustic panel lighting strips can be operated via the smartphone app or the included remote control. The remote works through internal walls for convenient adjustment across rooms, and the app supports colour customisation, mode selection and basic timer settings.
• Flexible Silicone & Cuttable Design: Made with a soft silicone casing, these led lights for acoustic wall panels are bendable to follow curved surfaces and corner layouts, and work well as led lights for slat wall installations. Each 1-metre strip can be cut at designated marking points to match the length of your wall panels or shelf runs. Mounting clips and fixing screws are supplied for straightforward installation. The sensor can be installed on panels or walls up to 2 cm thick.
• Versatile Application: This acoustic panel led strip set is constructed for reliable indoor decorative lighting use, and is not intended as a primary general lighting source. The silicone outer layer provides a degree of moisture resistance, and the strips can also be applied as self adhesive wall lights for temporary display setups. They are suitable for use with acoustic panels, slat walls, shelves and cabinet lighting projects.

Acoustic Wall Panel Lights 6-Pack RGB LED Strip Kit for Slat Wall & Media Wall This set of acoustic wall panel lights is designed for indoor decorative lighting use, compatible with standard acoustic wall panels, wooden slats wall panel systems and media wall setups. The kit provides a complete lighting solution for customising the atmosphere of living spaces, home offices and entertainment areas. Precise Dimensions & Panel Compatibility Each LED strip in this wall panel led lighting strip kit measures 39.37 inches/100 centimetres in length, with a profile of 0.47 x 0.47 inches/12 x 12 millimetres. This slim profile is designed to fit flush within the grooves of most standard acoustic wall panels and slat wall systems. The included motion sensor can be installed on panels or walls with a maximum thickness of 0.79 inches/2 centimetres, supporting flexible placement across different wall setups. Dual Control System for Convenient Operation These acoustic panel lighting strips can be controlled via two methods: the dedicated smartphone app and the included 2.4G RF remote control. The remote control supports through-wall operation for convenient adjustment across different rooms, while the app allows for custom colour selection, lighting mode adjustment and basic timer settings. Dynamic Lighting Effects for Multi-Scene Use These wall panel lights support music sync mode, where the lighting adjusts colour and pace in real time to match ambient music and sound. The kit includes over 40 pre-set dynamic lighting modes, suitable for creating different atmospheres for movie nights, gatherings and daily use. These led lights for acoustic wall panels also work well as media wall lights, led lights for slat wall installations and self adhesive wall lights for temporary decorative setups. Installation Guidance & Important Usage Notes Each acoustic panel led strip is flexible and can be cut at designated marking points to match the length of your wall panels or shelf runs. Mounting clips and fixing screws are supplied for straightforward installation on wooden and composite wall panels. The strips feature a soft silicone outer casing, which is bendable to fit curved surfaces and corner layouts. Important Safety & Usage Note: Please ensure that the LED light strips are firmly and securely connected to the controller before powering on. A loose or incomplete connection may cause the lights to flicker, or produce a faint buzzing sound during operation. Always disconnect the power supply before adjusting or repositioning the light strips. Safe Low-Voltage Design for Indoor Use This LED strip kit operates on 12V low voltage, designed for reliable indoor decorative lighting use. The silicone outer layer provides a degree of moisture resistance for use in dry indoor environments. The kit is suitable for use with acoustic panels, slat walls, shelves, cabinet lighting and other indoor decorative lighting projects, and is not intended for use as a primary general lighting source. Full Package Contents 4 x 39.37 inch/100 cm RGB LED light strips 1 x 2.4G RF remote control 1 x LED controller with built-in microphone 1 x 12V power supply with UK plug 1 x set of mounting clips and fixing screws 1 x user manual with installation instructions General Usage Guidelines This product is designed for indoor use only, in dry, temperature-controlled environments. Do not expose the light strips to water, high humidity or extreme temperatures. The lighting effects and colour reproduction may vary slightly depending on the installation surface and ambient lighting conditions.