LED Atomant Emergency Light Recessed/Surface, 3 W, Non-Permanent, 200 Lumens, Rechargeable, 3 Hours of Autonomy, Cool 6500K, Cool White, 270 x 210 x 50 cm

• LED Emergency Light with AUTOTEST. Dual function: permanent and non-permanent.
• [Measurements] Recessed installation, 285 x 115 x 50 mm. Surface installation, 260x95x50mm. Weight 0.25 kg.
• [Features] In its permanent mode it consists of 7 W and 600 lumens and as a normal emergency light, 3 W and 200 lumens. With a beam angle of 120° and a color temperature of 6500K, it offers wide and clear illumination of the area. Thanks to its built-in Li-ion battery, you can enjoy a battery life of 3 hours. Can be installed on surface or recessed into ceiling or wall. It also has AUTOTEST function, which warns of possible anomalies that may compromise operation.
• [Materials and accessories] Its protection rating is IP20, which guarantees good protection against solids (over 12 mm in size). It has a fireproof ABS housing, with plate and frame, as well as a diffuser that prevents seeing the inside of the lamp and favors the correct distribution of light.
• [Recommended uses] Exits, doors, elevators, parking lots, storage rooms, warehouses, workshops, large areas, emergency exits, shops, emergency stairs, offices, among others.

Atomant 3w LED emergency light, IP20 protection and 200 lumen, automatic ignition in just one second in case of power cut and with a range of up to 3 hours; installation possibilities the LED emergency lights can be installed both on the ceiling and on the wall, and can be placed in two ways: recessed by replacing the old luminaire with this new lighting by placing it inside the hole or making the hole in the new location; once this step has been made and the connection of the wiring is as simple as inserting the luminaire into the gap by pulling out to attract the spring pins that will hold the emergency light; surface: also to replace old emergency lamps overlapping on walls or ceilings; if a new connection is to be made, you must first bring the necessary wiring to the chosen place, make connections and remove the frame that carries the built-in luminaire in case it is installed recessed; followed.