Leankle Projector Lamp Assembly for Hitachi DT01481, CP-EW301N, CP-EW302N, CP-EX251N, CP-EX252N, CP-EX301N, CP-EX302N, CP-EX401, CP-EX402, CP-WX3030WN, CP-WX3041WN, CP-WX3042WN, CP-WX3530WN

• An easy and optimum lamp replacement not only for professional repairmen but also for average home and office users
• Well-designed and built lamp housing, fits in projector perfectly, no modification needed; all you need for lamp installation is a suitable screwdriver (NOT Included)
• A projector replaced with a Leankle lamp will be guaranteed bright, crisp images and vivid color performance as a new machine; also we promise a up to 5,000 hours usage time and 180 days warranty
• For use with Hitachi projector models CP-EW301N, CP-EW301NJ, CP-EW302N, CP-EW302WN, CP-EX251N, CP-EX252N, CP-EX301N, CP-EX301NJ, CP-EX302N, CP-EX401, CP-EX402, CP-WX3030WN, CP-WX3030WNJ, CP-WX3041WN, CP-WX3042WN, CP-WX3530WN, CP-WX3541WN, CP-WX4041WN, CP-WX4041WNJ, CP-WX4042WN, CP-X2541WN, CP-X2542WN, CP-X3041WN, CP-X3042WN, CP-X4030WN, CP-X4041WN, CP-X4041WNJ, CP-X4042WN
• The lamp will be wrapped and packed securely, so you'll get the lamp in great condition; Technical support team will be ready to help you resolve any lamp changing and general projector issues, feel free to post your questions at 'Customer questions & answers' section or simply send us a message

The Leankle projector lamp is supposed to fully replace the Hitachi DT01481 (Lamp part number), and works with projector models listed below. CP-EW301N CP-EW301NJ CP-EW302N CP-EW302WN CP-EX251N CP-EX252N CP-EX301N CP-EX301NJ CP-EX302N CP-EX401 CP-EX402 CP-WX3030WN CP-WX3030WNJ CP-WX3041WN CP-WX3042WN CP-WX3530WN CP-WX3541WN CP-WX4041WN CP-WX4041WNJ CP-WX4042WN CP-X2541WN CP-X2542WN CP-X3041WN CP-X3042WN CP-X4030WN CP-X4041WN CP-X4041WNJ CP-X4042WN We sincerely remind you checking either original lamp part number or projector model before ordering it. It only works when the lamp part number or projector model matches yours. Changing a projector lamp doesn't have to be complicated, in fact it's easier than you imagine. When doing it, you only need a suitable screwdriver (Not included) to loosen then tighten a few screws. Please refer to following instruction steps, which are applicable to most projectors. 1. Turn off the projector and disconnect the power cord. 2. Let the projector cool for at least 30 minutes. 3. Loosen the screws that secure the lamp cover, and remove the cover. 4. Loosen the screws that secure the lamp. 5. Pull the lamp up by its metal handle. 6. Replace with the new lamp. 7. Tighten the screws that secure the lamp. 8. Replace the lamp cover and tighten two screws. 9. Reset the lamp usage time by selecting "Yes" for Lamp Reset in the OSD Power Settings of the Advanced Setting menu. (Refer to your projector user manual, contact us for help if you lose it. ) To ensure the projector works better, please perform a dust cleaning for the air filter (For some projector brands only) after replacing the lamp. If the air filter has been used for a long time, consider replacing it too.