Lantelme 1 mm Pull tabs for Tile Levelling System Clips 100-250 - 500 or 1000 Pieces or Beginner Set (Set)

• The Lantelme tile laying aid set consists of: 100 pieces pull tabs for 1 mm, 1.5 mm, 2 mm, 3 mm and 4 mm joint width, 50 pieces reusable wedges and 1 mounting pliers with two adjustable axles
• Quick and easy to apply. Thanks to the simple and efficient handling, it is used by DIY enthusiasts and professional tilers
• For laying tiles, porcelain stone slabs, granite slabs and marble slabs to lay large and small surfaces on the floor or the wall flat and straight. Can also be used on uneven surfaces
• The tile levelling system is suitable for small and especially large format tiles, as these large panels cannot be easily corrected. The pull tab tears off below the tile, the so-called forced tear-off edge, so that nothing can survive when grouting in the joint
• Our tile laying system has been designed in collaboration with tile layers and is continually improved and further developed. The optimisations take place smoothly and care is always taken to ensure that all developments are compatible with older versions

Quick and easy to use. Thanks to the easy and efficient handling, used from DIY enthusiasts to professional tiles. For laying tiles, porcelain slabs, granite slabs and marble slabs to lay large and small surfaces on the floor or the wall flat, flat and straight. Can also be used on uneven surfaces, such as old buildings. Which means you can compensate for unevenness. Affordable with low effort. The Lantelme tile laying aid is not only inexpensive, but also reduces your effort as no additional joint crosses are required. Multi-purpose, clean and smooth. The tile levelling system is suitable for small and especially for large-format tiles, as these large panels cannot be easily corrected. The pull tab tears off below the tile, the so-called forced tear-off edge, so that nothing protrudes when grouting in the joint. Development in collaboration with craftsmen. Our tile laying system is always improved and developed in collaboration with tile layers. The optimisations take place smoothly and ensure that all further developments are compatible with older versions. The Lantelme tile levelling system uses pull tabs for 1 mm - 1.5 mm - 2 mm - 3 mm - 4 mm joint width for tile thicknesses 3 - 15 mm and 4 mm joint width XXL for 13 - 22 mm tile thickness, reusable wedges and a mounting pliers with two adjustable axles.