Klober KR9790-0429 Contract Dry Verge Unit (40 Pack) - Right, Grey

CONTRACT GRADE DRY VERGE UNITS FROM KLOBER Tough polypropylene plastic dry verge units for securing concrete interlocking verge tiles without mortar, quickly and easily. Just hook, clip, and slide to fit, then nail. Suitable for new or old roofs, with minimum pitch of 12.5°, and batten gauge of 260-350mm. Features & Benefits Quick and easy fitting - just hook, clip, slide and nail Resistance to tile uplift - holds tiles firmly, even in strong winds Weatherproof and maintenance free - years of mortar free protection Mortar-free system - no expansion/contraction Highly compatible - use with interlocking concrete tile Variable batten gauge - suitable for 260-350mm gauge British Standard compliant - meets BS 5534 and BS 8612 Technical Information Batten Spacing: 260-350mm Pitch: 12.5° to 90° Size (l x w x d): 397mm x 139mm x 59mm Material: Polypropylene Certification: Complies to BS 5534 and BS 8612 for cold and warm roof Guarantee: 10 years Fitting Klober Contract Dry Verge The following summarises the steps for typical instillation of the Klober Contract Dry Verge. Removing old mortar between tiles and undercloak. Tile battens should extend 30mm beyond gable or bargeboard, or 20mm if using Batten End Clips. Fit Eaves Closure to provide fixing point for first verge unit. Fit subsequent units towards the ridge. 1) Hooking under to engage with previous. 2) Click it over top of previous. 3) Slide up into position - inline with roof tile) 4. Nail to batten or batten end clip Insert Ridge Closure into last unit. The combs of the left and right Ridge Closure should interlock at the apex. Screw the Ridge End Cap to the ridge batten.