KitchenTap -garden hose Connector Adapter for Mixer/single taps with downward facing spout,blue,yellow,green and orange (yellow)

• TO FIT - please unscrew the bottom part of the connector,push over tap and position the white seal over the spout,pull orange lever down and then screw up from the bottom until the item is tight.Turn on the water and if any water sprays out the side turn the water off and reposition the white washer
• FITS-taps with downward facing spouts that do not exceed 28mm high x 35 mm wide
• PLEASE NOTE-THIS ITEM DOES NOT FIT ALL TAPS ,please look at the picture,if your tap does not look like the one in the picture it is unlikely to fit
• PROBLEM FITTING THIS ITEM?-if the item is still leaking when you have fitted it to your tap,please remove and resite the fitting,if this does not work PLEASE DO NOT CONTINUE TO TIGHTEN AS YOU CAN DAMAGE YOUR TAP,,please contact us via amazon messages for futher help and advise as this fitting will not fit all taps and attempting to do so will damage your tap
• PLEASE DO NOT OVERTIGHTEN - THIS CAN DAMAGE YOUR TAP - PLEASE FOLLOW THE FITTING INSTRUCTIONS

Product description This tap connector will fit many taps but not all,the tap will need to have a downward facing spout and the shaft of the tap will need to be flat so the fitting has something to tighten onto.To fit this tap unscrew the bottom part of the connector and push the fitting onto the tap and carefully position the tap spout over the white rubber seal.When it is in position pull doen the orange lever and then tighten from the bottom by screwing in the base.When the item is tight turn on the water and if it is spraying out of the fitting turn the water off and reposition.Please do not use the orange lever to tighten the fitting as there is a good chance that the fitting is stronger than your tap and daamage could result Safety Warning If you experience resistance when placing the connector onto your tap or pushing the lever downwards, then your tap may not meet the item size specifications or may require unscewing to loosen it. If you choose to force the item onto your tap or the lever downards, this may damage your tap. In this event, we are not responsible for the damage or any subsequent results of said damage. Legal Disclaimer If you experience resistance when placing the connector onto your tap or pushing the lever downwards, then your tap may not meet the item size specifications or may require unscewing to loosen it. If you choose to force the item onto your tap or the lever downards, this may damage your tap. In this event, we are not responsible for the damage or any subsequent results of said damage.