Kiln Dried Paving Sand - Joint Filling Brushing in Sand Natural 22KG (3)

• Kiln Dry Sand / Jointing Sand is used for brushing in-between joints of all types of block paving, creating a close & tight bond, adding stability to the block paving.
• Silica Sand ensures that the water can drain away freely through the laying course and sub-base preventing the build-up of surface water.
• Non-staining. The sand complies with BS 7533-3:2005 Table D.4. The Silica Sand is a sub-angular grain.
• Coverage: 50mm Block Thickness = Approx. 7.6 sqm/22kg bag. 60mm Block Thickness = Approx. 5.6 sqm/22kg bag. 80mm Block Thickness = Approx. 4.4 sqm/22kg bag
• The sand is classified as a medium grade sand (250um). The sand colour is best described as ‘buff’ but can vary according to availability. NOTE: Packaging can vary from Red Bag or Plain Bag (both shown)

Pavior Sand (also known as Kiln Dry Sand or Jointing Sand) is used for brushing in-between joints of all types of block paving, creating a close and tight bond, adding stability to the block paving. - Pavior Sand (the key to a perfect finish). - Silica Sand ensures that the water can drain away freely through the laying course and sub-base preventing the build-up of surface water. - Non-staining. - The sand complies with BS 7533-3:2005 Table D.4 - The Silica Sand is a sub-angular grain. - The sand is classified as a medium grade sand. 250um - The sand colour is best described as ‘buff’. Coverage: 50mm Block Thickness = Approx. 7.6 sqm/22kg bag 60mm Block Thickness = Approx. 5.6 sqm/22kg bag. 80mm Block Thickness = Approx. 4.4 sqm/22kg bag. Important - Please note, bags have perforations to avoid bursting during transit, but will be double bagged to catch any sand that may escape.