KATSU Tools 130W Full Automatic Self Priming Water Booster Pump

• Microcomputer control system can detect the water flow and automatically control the pump off and on
• Self priming with intelligent flow control
• It will delay the start by 3 seconds in order to protect the motor and personal safety
• Auto stop when tap is closed

It is an ideal solution for constant water supply in circumstances of insufficient water pressure. Voltage/Frequency: 220V/50Hz, Current: 1.5A, Rate Power: 120W, Max. Strike: 25 Metres, Rated Strike: 12 Metres, Max. Flow:1.8m³/h, Max. Suction: 8 Metres, RPM: 2860r/min, Inlet & Outlet Dia. : 25mm Max. Hot Water: 100℃, Protection Level: IPX44, Noise: 70DB. Main Features: -Delay Start: When the pump is switched on, it will delay the start by 3 seconds in order to protect the motor and personal safety. -Water stop pump stop: The microcomputer control system can detect the water flow and automatically control the pump off/on. -No water no power: The pump will automatically shut off if it runs 6 minutes without water, and it will restart automatically after one hour to check the condition of water supply until the water supply returns. -Intelligent flow control: When the water flow is very small, microcomputer control system will automatically detect and switch to "small flow control mode" to ensure the pump to work well with small water flow condition and avoid "pops pops" noise. The lifespan of pressure switch can be extended considerably and achieve the full head range operation.