KATSU 850W Submersible Water Pump for Clean and Dirty Water for Garden Pond, Pools, and Ditches + Float Switch

• Ideal for irrigating gardens as well as pumping contaminated or muddy water from wells, tanks, cellars or basins.
• 850W Motor with a maximum drainage flow of 17500 L/h to easily empty water from ponds, pools, hot tubs, and other bodies of water up to 6m deep
• Fitted with an automatic float switch for water level control. The float switch will turn the pump off when the water reaches a predetermined level to avoid damage to the pump.
• Stainless Steel Motor Housing

Motor Power: 850W Max Flow: 17500 L/H Max Depth: 8M Outlet: 2", with reducers IP Protection: IPX8 Weight: 6.8KG Feature: Ideal for irrigating gardens as well as pumping contaminated or muddy water from wells, tanks, cellars or basins. Fitted with an automatic float switch for water level control. The float switch will turn the pump off when the water reaches a predetermined level to avoid damage to the pump. In case of permanent installation, it is necessary to check every 3 months that start mechanism is working properly (float switch or sensor). Regularly remove dirt that may accumulate in the sump. It is recommended that an RCD is always used with a submersible pump as should be the case whenever electrical products are used near water. Your pump must not be used in following situations: - Water temperature to be sucked > 35°C - Continuous run (ex: fountain pump) - Drinking water supply or washing machines for dishes supply. - Corrosive, easily combustible, aggressive or explosive liquids (such as gasoline, petroleum or nitro thinner), saltwater, oils and greases must not be pumped. - Permanent submersion under 3 meters or more water.