Karl Dahm LevelMac Tiles Levelling System Base Set 3-12 mm Tile Thickness 2 mm in Box 50 Pulling Hoods 250 Tabs

• 50 x Lifting Caps Black for Tile Thickness 3 - 12 mm
• 250 x Threaded Flaps Base 2 mm (White) for Joint Width 2 mm
• The application of the tile levelling system is very easy and requires no more time than laying without tile levelling system. The few steps are implemented in just a few steps:
• The readers of the magazine "Tiles & Platten" have chosen our levelling system as the Product of the Year 2013.
• Karl Dahm tiling tools in top quality

How it works: 1. Step: pull the adhesive bed as usual, with large tiles (approx. From format 60 x 60 cm) is recommended to use the buttering floating process. Then insert the first tile 2. Step: Now place 1 - 2 base threaded elastics along the tile edge where you want to place the next tile so that half of the base of the flap sits under the tile. 3. Step: Place the next tile on the first tile so that the threaded elastics in the joint between the tiles. Now turn the hoods on the thread of the base straps. Do not twist them completely first, only when all hoods are in direct All hoods can also be screwed up. So the tiles are now all raised or lowered to the same level. 4. Step: Proceed over the entire surface to be laid on. As long as the adhesive bed is still Wet, the hoods can be tightened at any time, but you should not enter the tiles as long as the adhesive is still wet. 5. Allow the adhesive bed to cure completely. Then the reusable Hoods are turned off and collected while the threaded elastics with the lower part remain in the adhesive and at the predetermined breaking point under the thread can be broken off and disposed of. The base of the threaded elastics is jointed and is no longer visible after breaking.